The YD06-018 50T Frame Welded Shop Press is a heavy-duty industrial equipment designed for heavy machinery maintenance, large-scale hardware processing, and thick steel plate shaping. Its welded reinforced frame provides exceptional structural strength, while the side-movable press head and multiple safety components ensure flexible and safe operation.

• Structural Strength: Fully welded frame design with X-ray flaw detection, 50% higher anti-deformation capacity than bolted frames
• Safety Protection: Includes protective guards, combination blocks, and self-lock winches (500kg capacity)
• Operational Flexibility: 3.5" (89mm) horizontal press head movement improves efficiency by 40%
• Pressure Control Precision: Liquid-filled pressure gauge with ±1.2% accuracy for real-time monitoring

• High-temperature spray coating for oil and rust resistance
• Press head guide rail with long-acting grease coating
• Ground fixing holes for enhanced stability during heavy-duty operations

Straightens deformed drive axles of excavators and loaders using 35-45 tons of stable pressure with real-time pressure monitoring.

Bends high-strength steel plates (60-100mm thickness) into structural components with precise angle control.

Press-fits bearings (>200mm diameter) with 25-35 tons of pressure for tight, secure installations.

Separates aging components using 50 tons of pressure with assisted handling for reduced labor.

• Clean guide rail and apply lithium-based grease
• Check and tighten press head drive mechanism bolts (30-35N*m torque)
• Verify hydraulic oil level and replenish if low

• Clean dial with alcohol if contaminated
• Add vibration dampening if liquid is turbid
• Tighten connection interface and replace gaskets if leaking

• Inspect and replace worn wire rope if needed
• Check brake pads (replace if
• Verify workpiece doesn't exceed 500kg capacity

• Secure equipment with M16 expansion bolts
• Inspect for weld cracks and contact manufacturer if found
• Ensure workpiece is centered on worktable