5500kg Two-Post Lift: 1980mm Height, 2-Stage Column+Direct-Cyl for Heavy Truck/Bus Repair
| Parameter Category | Specific Value |
|---|---|
| Product Name | YD07-009 Two-Post Car Lift |
| Model | YD07-009 |
| Maximum Lifting Weight | 5500 kg (12100 lb) |
| Lifting Height Range | Maximum Lifting Height: 1980 mm (77.95 ") Minimum Lifting Height: 120 mm (4.72 ") |
| Overall Dimensions | Total Height: 4445 mm (175 ") Total Width: 3549 mm (139.72 ") Column Inner Width: 2910 mm (114.56 ") Drive-through Width: 2611 mm (102.80 ") |
| Limit & Structure | Height of the Limit Switch: 4320 mm (170.08 ") Column Design: 2-stage column design Cylinder Design: Direct-drive cylinder design |
| Support Arm Parameters | Arm Reach: 910-1386 mm (35.82-54.56 ") |
| Power Configuration | Motor Power: 2.2 kW Power Supply: 220V/380V, 50 Hz |
| Packaging & Loading | Quantity per 40' Container (Qty/40'Container): 24 pcs |
| Applicable Objects | Heavy-duty trucks (e.g., Foton Aumark, JMC Kairui Heavy-duty Version), large SUVs (e.g., Lincoln Navigator, Cadillac Escalade), commercial vehicles (e.g., light vans, small buses) (weight ≤ 5500 kg) |
-
5500 kg Ultra-High Load Capacity + 2-Stage Columns, Stable Support for Heavy-Duty VehiclesThe 2-stage columns are made of Q460 high-strength alloy steel plates with 18 mm wall thickness. Double welds and ultrasonic testing ensure structural integrity with only 0.2 mm deformation under full load. Designed for heavy-duty trucks (4000-5200 kg), large SUVs (3000-3800 kg), and commercial vehicles (3500-4800 kg).
-
1980 mm High Lifting Height + Direct-Drive CylinderEnables efficient in-depth maintenance with 120-150 mm more height than standard lifts. Direct-drive cylinder reduces power loss by 20% with lifting speed of 10 mm/s (18 minutes full lift) and controlled descent at 3 mm/s.
-
Wide Adaptation Dimensions + Flexible Arm Length2910 mm column inner width and 2611 mm drive-through width accommodate wide vehicles. Adjustable 910-1386 mm arm length adapts to wheelbases of 2800-4200 mm with 99% compatibility for heavy vehicle maintenance.
-
Stable Power + Safety Limit2.2 kW motor with dual-circuit power (220V/380V) maintains performance during voltage fluctuations. 4320 mm limit switch prevents roof collisions. Includes overload protection and mechanical arm locking for 180% higher safety factor.
5500 kg capacity supports Foton Aumark/JMC Kairui (5000 kg). 1980 mm height enables standing transmission work, reducing maintenance time from 120 to 80 minutes.
2611 mm drive-through width accommodates King Long Higer (4500 kg). Adjustable arms adapt to long wheelbases, improving efficiency by 60%.
2-stage columns handle high-frequency use (10 lifts/day). Dual voltage works with 380V industrial or 220V generator power, reducing inspection time from 90 to 55 minutes.
1980 mm height exposes chassis for uniform spraying. 2910 mm width accommodates wide SUVs without removing side steps, improving results by 40%.
A1: Yes. The 355 mm clearance (4.8m - 4.445m) meets operational requirements. Ventilation pipes can be accommodated within the 2910 mm column width without structural modifications.
A2: Check hydraulic oil level (add 32# anti-wear oil if low) and clean the inlet filter. Perform 3 empty test lifts. Regular maintenance every 6 months prevents recurrence.
A3: Requires ≥1500 kg/㎡ load capacity (300mm C40 concrete recommended) and ≤5mm flatness error. Adjusting bolts (0-60mm range) compensate for unevenness. Professional installation guidance available.
A4: Clean slide rails, apply 2# lithium-based grease, and check for deformation. Regular maintenance every 3 months maintains performance.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.