CompAir QX105047 Alternative Glass Fiber Screw Compressor Oil Filter

CompAir Replacement QX105047 Glass Fiber Screw Compressor Oil Filter

Screw Compressor Oil Filter

The purpose of the compressor oil filter is to remove all impurities that may cause wear from the oil, but not to separate any other special additives.

In oil-free and oiled compressors, the compressor oil is used to lubricate the compressor component bearings and drive shaft bearings, as well as the gears. Any dust or dirt entering the roller and gear contact surfaces will damage these bearings.
Bearing wear or gear damage will eventually result in rotor contact, which will result in performance losses and reduced compressor component life.
Further damage to the bearing roller will lead to box fracture and ultimately complete destruction of the compression core.
In the oiling screw, oil is used to seal and dissipate heat between the rotors. Dust and dirt in the compressor oil can end up between the rotor and the casing of the compressor movement, causing rotor damage and performance loss.

Tips:
This is only a part of the part numbers, many oil filters P/N are not listed, in addition there are replacements filters for many other air compressor brands, such as: Atlas Copco, Bolaite, Gardner Denver, Fusheng, Liutech, Kaeser, CompAir, Quincy, Mann, Mitsuiseiki, Kobelco, Sullair, etc.

Features

1, Directly replace Original Parts, compatibility 100%.

2, Replacement time 4000 hours, filtration accuracy <15μm, filtration efficiency >99%.

3, High-strength plastic casing, corrosion-resistant, high-pressure resistant, rubber or fluorine-sealed,

leak-proof oil.

4, High-quality glass fiber, cost-effective, reducing maintenance costs.

5. Ensure To Meet Original Manufacturing Standard,Better filtration & Better oil cleanliness.

Oil Filter QX105047 Application

The oil filter QX105047 was designed for Compair and GD air compressors