Air Compressor 3.8m3/min Refrigerated Air Dryer
Air Compressed Air Treatment 3.8m3/min Refrigerated Air Dryer
Moisture creation in a compressor is unavoidable, but if properly treated, it will prevent damage to pneumatic machinery, air motors, valves and any other components, as well as avoid possible contamination of the end products. In order to avoid unnecessary maintenance repairs and potential production shutdown, it is recommended to be proactive and properly implement the necessary steps to keep the compressed air dry, clean and suitable for your operations.
| Model/Specification | Rated Flow Rate | Power Source | Compressor Power | Refrigerant Model | Electic Fan Motor | Pipeline Dimensions of The Air Passed |
|---|---|---|---|---|---|---|
| HOS-15/10 | 17 | 3Ph/380V/51Hz | 2.9 | R22 | 240 | PN1.0DN65Flange |
| HOS-20/10 | 23 | 3Ph/380V/52Hz | 3.7 | R22 | 360 | PN1.0DN80Flange |
| HOS-25/10 | 27 | 3Ph/380V/53Hz | 4.8 | R22 | 360 | PN1.0DN80Flange |
| HOS-30/10 | 34 | 3Ph/380V/54Hz | 6.5 | R22 | 600 | PN1.0DN100Flange |
| HOS-40/10 | 45 | 3Ph/380V/55Hz | 8.0 | R22 | 600 | PN1.0DN100Flange |
| HOS-50/10 | 55 | 3Ph/380V/56Hz | 8.8 | R22 | 900 | PN1.0DN125Flange |
| HOS-60/10 | 65 | 3Ph/380V/57Hz | 14 | R22 | 1800 | PN1.0DN125Flange |
| HOS-80/10 | 87 | 3Ph/380V/58Hz | 18 | R22 | 2200 | PN1.0DN125Flange |
Stable and consistent outlet pressure dew point
·Reasonable simplified design ensures that the compressed air and desiccant contact time is 4.8 seconds to meet the dew point requirements of finished gas;
·30% of the remaining amount of desiccant, desiccant and compensation with the natural aging, to ensure that the drying effect;
·Large diffuser to ensure uniform air flow through the desiccant layer, eliminating channeling phenomenon.
Regeneration loss less than 12%
·Excellent barrel design, saving 95% of the heat absorbed, the stored heat is used to increase regeneration regeneration temperature of regeneration stage, improve the desorption capacity of the equipment, making the regeneration completely;
·Drying and regeneration using reverse convection, wet air flow through the best effect when the adsorbent;
·The amount of regeneration gas can be adjusted according to the operating load demand of the dryer.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.