Laminar Flow all steel Laboratory Fume Hood 6mm thick Acid Dense Board

 

The all-steel fume hood is the most commonly used type of local exhaust equipment in the laboratory. Its structure and conditions are different, and the exhaust effect is also different. The performance of an all-steel fume hood mainly depends on laboratory ventilation, which is an essential part of laboratory design. In order to prevent laboratory personnel from inhaling or swallowing toxic, disease-causing or unknown chemicals and organisms, the laboratory should be well ventilated. To prevent the absorption of some vapors, gases and particles (smoke, soot, dust and air suspended matter), pollutants should be removed by all-steel fume hoods, fume hoods or partial ventilation methods. Scope: Biopharmaceuticals, biological analysis, plant culture, environmental testing and scientific research on electronic instruments.

 

 

Specifications of all-steel fume hood
Cabinet	1mm cold rolled steel, coated with epoxy resin.
The best	Physical and chemical board (PP/stainless steel/epoxy resin/ceramic table top, can meet different needs)
Dashboard	Use touch electronic control panel
Accessories	Small faucet and pp sink, remote air valve and air nozzle can be configured as required
Lights	40W explosion-proof fluorescent lamp
Illuminance	Above 300LX
Windows	5 mm thick safety explosion-proof glass
Ventilation speed	0.5m/sec
Power	220V 50Hz 300watts
Size	1200 * 900 * 2350mm,1500 * 900 * 2350mm,1800 * 900 * 2350mm