G450 Cz Purlin Roll Forming Machine 12 Rows 9500x800x1200mm
G450 Material C And Z Interchangeable Purlin Roll Forming Machine
The process flow of "G450 material C and Z interchangeable purlin roll forming machine": the strip steel is fed in from the end of the equipment, and is pressed into C shaped purlin steel through various pressure rollers, and then sent out from the machine head.
In the traditional process, after the C shaped purlin steel is pressed into a shape, it needs to be manually cut into a fixed length, and then transported to the punching equipment for punching according to the size required by the customer. Production is discontinuous and inefficient. Therefore, we have improved these problems and developed a "G450 material C and Z interchangeable purlin roll forming machine"
The improvement process of "G450 material C and Z interchangeable purlin roll forming machine" was completed in three steps.
The first improvement is the addition of a length measuring device and a flying saw. When the compaction length reaches the set length, the flying saw will work and automatically cut the profile.
The second improvement step is to add a hydraulic punching device for punching four holes at a time, and then use a flying saw to cut from the middle so that two adjacent C shaped purlin steel profiles have two heads Side hole. And tail.
The third step is to improve, add another center punching device, punch out the center hole according to the interval set by the user in the strip pressing process, and punch out up to 16 center holes.
The fourth step is to improve according to the requirements of "G450 material C and Z interchangeable purlin roll forming machine" to punch double holes in the middle of the profile, change the side hole 4-hole punching die to a 2-hole die, and modify the side holes This program enables the side hole punching device to punch double holes in the middle, and the distance of the holes is set by the user, and it can punch up to 8 groups of double holes.
Technical parameters of G450 Material C And Z Interchangeable Purlin Roll Forming Machine
| G450 material C and Z interchangeable purlin roll forming machine | ||
| Suitable to process | Steel plate | |
| Width of the plate | 210mm - 540mm | |
| Rollers | 12 Rows | |
| Dimensions | 9500*800*1200 | |
| Weight | 6.5 tons | |
| Main Motor Power | 11 kw | |
| Thickness of the plate | 18 mm | |
| Producitivity | 10-12m/min | |
| Electrical System | Control system: PLC control panel | |
| Power: 380V 50Hz (as per local requirement) | ||
| Run-out Table | Frame: A3 steel | |
| Roller type | ||
| Quantity: 1 pc | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.