Fully Automatic Solar Photovoltaic Bracket Cold Roll Forming Machine
Durable use fully automatic solar photovoltaic bracket forming machine
Solar photovoltaic stent forming machine is equipment for producing photovoltaic stents.
The solar photovoltaic support forming machine uses galvanized steel sheet and various color steel or aluminum sheets as cold-rolled forming materials to slow down the corrosion of the photovoltaic support and increase the hardness of the photovoltaic support to achieve sufficient load-bearing capacity.
The photovoltaic support forming machine can be completed by one person, such as uncoiling, straightening and feeding, fixed punching, rolling, subsequent cutting, output and other processes, which helps you greatly reduce labor costs and improve work efficiency.
The whole photovoltaic support molding machine is controlled by PLC electronic control, which is simple and easy to operate. At the same time, we also equip the photovoltaic support molding machine with parts manuals. Even if the parts of the machine are damaged during long-term work, you can quickly buy the corresponding parts. Replace, reduce your downtime loss.
Technical parameters of Durable use fully automatic solar photovoltaic bracket forming machine
| 1. Profile | .Thickness:2.0mm |
| 2. Process flow | Decoiling---feeding---leveling---punching---forming---cutting---production |
| 3. Manual decoiler | 1).Material coil inner diameter: 450mm-550mm |
| 2).Max coil width: 600mm | |
| 3).Carrying capacity: 1500kg | |
| 4. Punching machine | 60t Automatic punch holes(with one set of mold) |
| 5. Forming system | 1).Number of forming steps:2 steps feeding rollers,4 steps leveling rollers, 12steps forming rollers, |
| 1).Shaft material:45# steel | |
| Roller material:45# steel | |
| Outer diameter:80mm | |
| 2).Transport: by chain Chain:1 inch | |
| 3).Forming speed:5-10m/min | |
| 4).Motor:11 kw | |
| 5).Voltage:380v,50Hz,3 phase | |
| 6)Size of the machine line :9.5*1.5*1.2m | |
| 7)Weight :6tons | |
| 6.Cutting system | 1).Material: blade and mold material: Cr12 steel with quenched treated 60-62℃ |
| 2).Cutting system:advanced hydraulic drive, automatic cutting after forming, | |
| no distorting or wasting, high level safety factor. | |
| 7.Control system | 1). Screen: Delta screen from Taiwan |
| 2). PLC: Delta DVP14ES from Taiwan | |
| 3). Coder: ENC-1-1-1T-24 from South Korea | |
| 8. Hydraulic | 1). Advanced hydraulic system from Taiwan |
| 2). Power:5.5kw | |
| 9. Spare Parts | 1).Easy damaged parts: conk 2 pcs, fuse-link 4 pcs |
| 2).Rubber mat 1 pcs; | |
| 3).Bolt spanner 1 pcs |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.