Reinforcing Mesh Welding Machine Description

Reinforcing mesh welding machine is complete equipment for welding reinforcing mesh,which is manufacturer by our company based on learning foreign advanced experience and advanced technologies in additional actual production demands in the international market.This series equipment can perform high quality cross welding for hot rolled ribbed rebar,cold rolled rebar and round bar.

Reinforcing Mesh Welding Machine Technology

1. This machine cent-control and welding time are composed of PLC program system . The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press at one time, separate welding. Surely,if the power supply is enough big,it can also adopt the welding at the same time.

2. Line wires adopt per-cut wires,line wires are put by hand based on the positioning device,then automatic tightening and send the down electrodes by sending line wires car installed with the step motor; When the mesh is being welded, line wires of the next mesh can be placed, which greatly shortens the working interval time of the machine.

3. Cross wires also adopt pre-cut wires,the cross wire hopper obtains wires by motor driver devices, electric magnetic increase feeding device auto-feeding the wefts into the preparation area of the device from the large storing hopper(storage up to 1000kg),it is installed in the removable pulling mesh rack,very convenient to adjust and maintain.

4. Our transformers adopts big power at 200KVA every one,which can ensure the welding quality in good condition and adopt water cooling system,so the machine can work for 24 hours continuously.

5. Pulling mesh way adapts servo motor back and forward according to the setting parameters into the touch screen.

Reinforcing Mesh Welding Machine Parameter

Products & Application

Products such as coal mine supporting mesh, wire mesh fence, high-rise building steel bridges mesh, reinforcing mesh applied in construction, road and so on.