707-98-26310 7079826310 Komatsu Bucket Cylinder Seal Kit For PC55MR-3 PC55MR-5 PC55MR-5M0

707-98-26310 7079826310 Komatsu Bucket Cylinder Seal Kit For PC55MR-3 PC55MR-5 PC55MR-5M0

Product Show:

Precautions:

1. Before designing grooves, please read the descriptions of each series of products by yourself, and clearly distinguish whether the product uses an integral groove or a split groove; during the process of installing the seals, pay attention to avoid sharp edges, and the hole seals must be installed in the integral groove. With the help of installation tools; the designer must consider parameters such as groove dimensional accuracy, surface roughness, extrusion gap, etc. For details, please refer to the product instruction manual, diagram and size table.

2.Before installing the seal, it must be ensured that there are no impurities and cracks in the sealing groove, and operating oil should be applied to the sealing groove and the surface of the seal respectively; the seals should be installed gradually in sequence; Avoid twisting and skewing; if it is a split slot, tighten the gland last.

Seal classifiC.A.Tion:

Seals can be divided into two C.A.Tegories: static seals between relatively static joint surfaces and dynamic seals between relatively moving joint surfaces.

There are three main types of static seals: point seals, glue seals and contact seals. According to the working pressure, static seals can be divided into medium and low pressure static seals and high pressure static seals. Medium and low pressure static seals are usually made of softer materials and wider gaskets, while high pressure static seals use hard materials and metal gaskets with a narrow contact width.

Dynamic seals can be divided into two basic types: rotary seals and reciproC.A.Ting seals. According to whether the seal is in contact with the parts that move relative to it, it can be divided into contact seals and non-contact seals. Generally speaking, the sealing performance of the contact seal is good, but limited by friction and wear, it is suitable for the occasions where the linear velocity of the sealing surface is low. Non-contact seals have poor sealing properties and are suitable for higher speeds.

FAQ:

Q1: Can I get the sample?

Yes, pay sample, freight collect.

Q2: When will you ship my order?

Normally, it is within 3 days after the customer pays.

Q3: How long can I receive the goods?

It depends on the mode of transportation.

Q4: How can I trace my order?

We will send the tracking number to you by e-mail or other contact details.

Q5: Quality of the products have a guarantee?

Please feel free to buy, 100% strict control to ensure product quality.