1550nm 80km 10G SFP+ Optical Transceiver
1550nm 80km 10G SFP+ Optical Transceiver
Cisco SFP-10G-ZR-C Compatible 10G-ZR SFP+ 1550nm 80km SMF Transceiver Module
Product Descriptions
1. Type: SFP+
2. Compatibility: Multi-Vendor MSA Compatible
3. Tx/Rx Wavelength: 1550 nm. / 1550 nm.
4. Media Type: Single-Mode Fiber (SMF)
5. Max. Distance: 80 km
6. Data Rate: 1.25-10.31 Gbps
7. Temperature: Standard 0°-70°C
Technical Data
| TX Wavelength: | 1550 nm. | Media Type: | Single-Mode Fiber (SMF) |
| RX Wavelenght: | 1550 nm. | Maximum Distance: | 80km |
| Supported Data Rate: | 1.25-10.31 Gbps | Supported Applications: | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps) |
| Connectors: | Double LC | Transmitter Type: | EML Laser |
| Minimum Transmitting Power: | 0 dB | Receiver Type: | APD Photodiode |
| Maximum Transmitting Power: | 5 dB | Compliance: | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
| Receiver Sensitivity: | -23 dBm | Power: | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 1543 | 1550 | 1557 | nm | |
| Ave. output power (Enabled) | PAVE | 0 | 5 | dBm | 1 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 8.2 | dB | |||
| RMS spectral width | Δλ | 1 | nm | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | λ | 1260 | 1610 | nm | ||
| Receiver Sensitivity | PSEN1 | -24 | dBm | 2 | ||
| Recevier Reflectance | Rrx | -27 | dB | |||
| Overload | PAVE | -7 | dBm | |||
| LOS Assert | Pa | -37 | dBm | |||
| LOS De-assert | Pd | -28 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Measured with worst ER=9dB
2. PRBS 231 – 1 and BER<10-12@10.3125G
Product Features
● Supports 9.95 to 11.3Gb/s bit rates with Dual CDR
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Cooled 1550nm EML transmitter, APD receiver
● Applicable for 80km SMF connection
● Low power consumption, < 1.5W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-ZR
● Electrical interface compliant to SFF-8431,SFF-8432
● Operating case temperature:
Commerical:0 to 70 °C
Applications
● 10GBASE-ZR at 10.3125Gbps
● OTN G.709 OTU1e/2/2e
● 4x, 8x and 10x 10G Fiber Channel
● Other optical links
Product Brief
Olinkcom’s OLSP551XL-CD80 transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecommunication and datacom.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.