60km SFP+ Fiber Optic Ethernet Transceiver 1330 Nm 10G MSA Compliant

60km SFP+ Fiber Optic Ethernet Transceiver 1330 Nm 10G MSA Compliant

10Gb/s SFP+ BIDI TX:1270nm/RX:1330nm 60km Optical Transceiver Module MSA compliant

Olinkcom's OLSB231XL-CD60 is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for long reach 10Gb/s duplex optical data communications application. The SFP+ BIDI module features a highly reliable 1270nm DFB transmitter and 1330nm APD photo-detector into single LC optical connector, which provides 60km link distance over single-strand single mode fiber.

Specification

• Hot-pluggable SFP+ footprint
• Electrical interface compliant to SFF-8431
• Compliant with SFF-8472
• 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER
• 1270nm DFB transmitter, 1330nm APD photo-detector receiver
• Distance up to 60km on single mode fiber

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured with worst ER=6; BER<10^-12; 2^{31 – 1} PRBS.

Product Feature

1. One Fiber Bi-Di SFP+ Optical Transceiver, Bidi WDM SFP+

2. Up to 10.3 Gbps Bi-directional Data Links

3. Fully Compliant with SFP+ MSA

4. Compliant to IEEE 802.3ae 10GBASE-BX

5. SFF-8472 Digital Diagnostic Function

6. Simplex LC Connector

7. 1330TX/1270RX and 1270TX/1330RX

8. Distance Up to 10, 20, 40 km

9. Only Required +3.3 V Power Supply

10. RoHS Compliant

11. -5 to 70C Operating

Application:

10GBASE-BX at 10.3125 Gb/s

10GBASE-BX at 9.953 Gb/s

1000 Base-LX Ethernet

8XFC at 8.5Gbps

4XFC at 4.25Gpbs

2XFC at 2.125Gpbs

1xFC at 1.0625Gbps