DOM LC SMF 10G SFP+ Fiber Transceiver Arista Compatible Hot Pluggable

DOM LC SMF 10G SFP+ Fiber Transceiver Arista Compatible Hot Pluggable

10G-LR SFP+ 1310nm 10km DOM LC SMF Module Arista Networks SFP-10G-LR Compatible

Descriptions

Arista Networks SFP-10G-LR compatible SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication.

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Features

● Supports 11.3Gb/s bit rates

● Duplex LC connector

● Hot pluggable SFP+ footprint

● Applicable for 10km SMF connection

● Low power consumption, < 1W

● Optical interface compliant to IEEE 802.3ae 10GBASE-LR

● Electrical interface compliant to SFF-8431

● Operating case temperature:  Commerical:0 to 70 °C

Applications

● 10GBASE-LR/LW at 10.3125Gbps

● 10G Fiber Channel

● Other optical links