Edgecore Compatible 10GBASE-SR SFP+ Transceiver 850nm 300m DOM
Edgecore Compatible 10GBASE-SR SFP+ Transceiver 850nm 300m DOM
Edgecore ET5402-SR Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver
The Edgecore ET5402-SR compatible transceiver provides a high performance and cost-effective solution for 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) fiber connectivity over multi-mode optical cable. It is programmed to be suitable for use with Edgecore 10-Gigabit Ethernet Switches, Security gateway appliances and Network Adapters.
Product Features
1. Hot pluggable
2. 10Gb/s serial optical interface
3. Up to 300m on 50/125um MMF (2000MHZ km)
4. Compliant with SFP+MSA
5. SFP MSA package with duplex LC connector
6. Digital Diagnostic Monitor Interface
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate | DR | 9.953 | 10.3125 | 10.518 | Gb/s | |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc5 | 280 | mA | |||
| Operating Case Temp. | Tc | 0 | 70 | °C | ||
| TI | -40 | 85 |
Digital Diagnostic Specifications
The OLSP851XL-C(I)DS3 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
| Parameter | Symbol | Units | Min. | Max. | Accuracy | Note |
| Transceiver temperature | DTemp-E | ºC | -45 | +90 | ±5ºC | 1 |
| Transceiver supply voltage | DVoltage | V | 2.8 | 4.0 | ±3% | |
| Transmitter bias current | DBias | mA | 0 | 80 | ±10% | 2 |
| Transmitter output power | DTx-Power | dBm | -8 | +1 | ±2dB | |
| Receiver average input power | DRx-Power | dBm | -13 | 0 | ±2dB |
Notes:
1. Internally measured
2. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
Details
• +3.3V single power supply
• Below 1W power consumption
• High transmission margin
• Very low EMI and excellent ESD protection
• Wide data-rate range
Olinkcom always provide high performance and costly effective solution for customers in datacom and storage applications.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.