SMF 10Gbps SFP+ Fiber Transceiver Module 1310nm 10km 3.3V Single Mode
SMF 10Gbps SFP+ Fiber Transceiver Module 1310nm 10km 3.3V Single Mode
Planet MTB-LR Compatible 10GBASE-LR SMF 1310nm 10km SFP+ Transceiver
Olinkcom’s OLSP311XL-CD10 is an Enhanced Small Form-factor Pluggable (SFP+) transceiver module with maximum data transfer rate of 10 Gbps up to 10km over singlemode fiber cable. It is used in compatible network devices with SFP slot. The SFPs are Multi-Source Agreement (MSA) compliant and built to OEM specifications.
● LC Fiber Optic Connector Type
● 100% Guaranteed Compatibility
● Up to 11.1Gbps Data Links
● Up to 10km transmission on SMF
● VSCEL laser and PIN receiver
● Fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate | 9.953 | 10.3125 | 11.3 | Gb/s | ||
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc5 | 300 | mA | |||
| Operating Case Temp. | Tc | 0 | 70 | °C | ||
| TI | -40 | 85 |
Digital Diagnostic Specifications
The OLSP311XL-C(I)D10 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
| Parameter | Symbol | Units | Min. | Max. | Accuracy | Note |
| Transceiver temperature | DTemp-E | ºC | -45 | +90 | ±5ºC | 1,2 |
| Transceiver supply voltage | DVoltage | V | 2.8 | 4.0 | ±3% | |
| Transmitter bias current | DBias | mA | 2 | 80 | ±10% | 3 |
| Transmitter output power | DTx-Power | dBm | -8 | +2 | ±2dB | |
| Receiver average input power | DRx-Power | dBm | -16 | 0 | ±2dB |
Notes:
1. When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
Compatibility
• XGSW-28040
• XGSW-28040HP
• XGS3-24042
• XGS3-24242
• SGS-6340-16XR
• SGS-6340-20S4C4X
• SGS-6341-24P4X
• SGS-6341-24T4X
• SGS-5220-24S2XR
• SGS-5220-24P2X
• SGS-5220-24T2X
• IGS-5225-20T4C2X
We make sure our transceivers are tested rigorously by Certified technicians, and cover each item by 3 years warranty. Contact us for more information and configuration support on the SFP-10G-LR.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.