SR 850nm 300m 10G XFP Module
SR 850nm 300m 10G XFP Module
Cisco XFP-10G-MM-SR Compatible 10G XFP SR 850nm 300m DOM LC MMF Transceiver Module
Product Descriptions
This Cisco compatible Small Form Factor 10Gb/s (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification, now available with Commerical Temperature Range of Operation(0 °C to 70°C) and Industrial Temperature Range of Operation (-40°C to +85°C).
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) = -40 to 85℃ VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VIN,PP | 120 | 1000 | mVpp | ||
| Transmit Disable Voltage | VD | 2.0 | Vcc | V | 1 | |
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | 2 | ||
| Transmit Disable Assert Time | Tda | 10 | us | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 340 | 850 | mVpp | 3 | |
| Output rise time and fall time | Tr, Tf | 40 | Ps | 4 | ||
| LOS Fault | VLOS_F | VCC-0.5 | Vcc | V | 5 | |
| LOS Normal | VLOS_N | Vee | Vee+0.5 | V | 5 | |
Notes:
1. Or open circuit.
2. After internal AC coupling.
3. Into 100 ohms differential termination.
4. 20 – 80 %.
5. Loss Of Signal is open collector to be pulled up with a 4.7k~ 10k resistor to 3.15 – 3.6V.
Logic 0,indicates normal operation; logic 1 indicates no signal detected.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 840 | 850 | 860 | nm | |
| Ave. output power | PAVE | -6 | -1 | dBm | 1 | |
| Optical Modulation Amplitude | POMA | -2.8 | -1.5 | dB | OMA | |
| Extinction Ratio | ER | 3.5 | dB | |||
| RMS spectral width | Δλ | 0.45 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | |||
| Dispersion penalty | TDP | 3.9 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Tx Jitter | TJ | Compliant with IEEE 802.3ae | ||||
| Receiver | ||||||
| Operating Wavelength | λ | 840 | 850 | 860 | nm | |
| Receiver Sensitivity | PSEN1 | -11.1 | dBm | 2 | ||
| Stressed Receiver Sensitivity | PSEN2 | -7.5 | dBm | 2 | ||
| Overload | Pmax | 0.5 | dBm | |||
| Receiver Reflectance | Rrx | -12 | dB | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -14 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER=4@10.3125G; BER<10-12; 231 – 1 PRBS.
Product Details
● Supports 9.95 to 11.3Gb/s bit rates
● Duplex LC Connector
● Compatible with Cisco
● Hot-pluggable XFP footprint
● 850nm heated VCSEL laser
● Applicable for 300m MMF connection
● Low power consumption, < 1.3W
● Digital Diagnostic Monitor Interface
● No Reference Clock required
● Operating case temperature: Commerical:0 to 70 °C, Industrial:-40 to 85°C
We not only provide most of major brands compatible, like Cisco, Juniper, Alcatel, Extreme, Brocade etc, but also support the customization.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.