Shenzhen Olinkcom Technology Co.,Ltd
                                                                                                           
Verified Supplier
15 Years
Since 2011
Menu

CFP2-100G-LR4 CFP2 Optical Transceiver 1310nm 10km DOM LC SMF

Price Negotiable
Price: Negotiable
MOQ: 1 pc
Delivery Time: 3-5 working days
Brand: OLKOPTO
Product Description

CFP2-100G-LR4 CFP2 Optical Transceiver 1310nm 10km DOM LC SMF

 

Cisco Compatible CFP2-100G-LR4 100GBASE-LR4 1310nm 10km DOM LC SMF Transceiver Module

 

 

Olinkcom 100G CFP2 LR4 optical Transceiver integrates receiver and transmitter path on one module. In
the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers.
The laser drivers control four EMLs (Electric-absorption Modulated Lasers) with center wavelength of
1296 nm, 1300nm, 1305nm and 1309 nm. The optical signals are multiplexed to a single –mode fiber
through an industry standard LC connector. In the receive side, the four lanes of optical data streams are
optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN
photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical
interface, low power consumption and MDIO management interface.

 

Optical Characteristics

Parameter Symbol Unit Min Typ Max Notes
Optical Transmitter Characteristics
Signaling rate, each lane   GBd 25.78125 ±100 ppm 100GBase-LR4
27.9525 ±20 ppm OTU4
Four Lane Wavelength Range λ1 nm 1294.53 1295.56 1296.59  
λ2 1299.02 1300.05 1301.09  
λ3 1303.54 1304.58 1305.63  
λ4 1308.09 1309.14 1310.19  
Total launch power   dBm     10.5 100GBase-LR4
    10 OTU4
Average launch power, each lane Pavg dBm -4.5   4.5 2
-0.6   4
Optical modulation amplitude, each lane (OMA)2 OMA dBm -1.3   4.5  
Difference in launch power between any two lanes (OMA)   dB     5  
Extinction ratio ER dB 4     100GBase-LR4
4   6.5 OTU4
Side-mode suppression ratio SMSR dB 30      
Transmitter and dispersion penalty, each lane TDP dB     2.2  
Optical return loss tolerance   dB     20  
Transmitter reflectance3   dB     –12  
Transmitter eye mask {X1, X2, X3, Y1, Y2, Y3}     {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} 100GBase-LR4
Optical Receiver Characteristics
Receive Rate for Each Lane   Gbps   25.78125 27.9525  
Overload Input Optical Power Pmax dBm 5.5     3

Average Receive Power for Each

Lane

Pin dBm -8.6   3 4

Receive Power In OMA for Each

Lane

PinOMA dBm     3  

Difference in Receive Power in

OMA between Any Two Lanes

  dBm        

Receiver Sensitivity in OMA for

Each Lane

SOMA dBm     -8.6 5

Stressed Receiver Sensitivity in

OMA for Each Lane

  dBm     -6.8 6, 7

 

Notes:

1. The supply current includes CFP2 module’s supply current and test board workingcurrent.

2. Average launch power, each lane (min) is informative for 100GBase-LR4, not the principal indicator of signal strength.

3.The receiver shall be able to tolerate , without damage, continuous exposure to an optical input signal having this average power level

4. Average receive power, each lane (min) is informative and not the principal indicator

of signal strength. A received power below this value cannot be compliant; however, a value above this does not ensure compliance

5. Receiver sensitivity (OMA), each lane (max) is informative

6. Measured with conformance test signal at TP3 for BER=10-12

7. conditions of stressed receiver sensitivity test: vertical eye closure penalty for each lane is 1.8dB;stressed eye J2 jitter for each lane is 0.3UI; stressed eye J9 jitter for each lane is 0.47UI.

 

Product Features

● Supports up to 112Gbps bit rates

● Duplex LC connector

● Hot pluggable

● Operating electrical serial data rate up to 27.952493Gbps

● 4 parallel electrical serial interface

● Applicable for 10km SMF connection

● Low power consumption, < 6W

● Digital Diagnostic Monitor Interfacel

● MDIO Communication Interface

● Operating case temperature:Commerical:0 to 70 °C

 

Applications

● Data Center &100G Ethernet

● ITU-T OTU4 OTL4.4

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Shenzhen Olinkcom Technology Co.,Ltd
Location 4/F, No.2 Building, Delux Science and Technology City, GuanLan Hi-tech park, No.5 Guanyi Road, Longhua District, Shenzhen, China
Contact Person Larry

Request A Quote

Please check your email address.
Your message must be at least 20 characters.