E&H Instrument Microwave Barrier Transceiver Soliwave FDR56 FDR56-AA1ADDVE21
E&H Instrument Microwave Barrier Transceiver Soliwave FDR56 FDR56-AA1ADDVE21
Supply / Communication |
85 ... 253 VAC |
| Measuement range | max. 100 m |
Measuring principle |
Microwave barrier |
Specs at a glance
-
Process temperature
Non-contact installation: any
Within installation:
-40 °C...+70 °C (-40 °F...+158 °F)
With HT-Adapter:
up to +450 °C (+842 °F) -
Process pressure / max. overpressure limit
Non-contact installation: any
Within installation:
0.5 bar ... 6.8 bar (7.2 psi ... 99 psi) abs.
With HD-Adapter:
up to +21 bar (+305 psi) abs. -
Min. density of medium
Solid weight: > 10 g/l
Field of application
The Soliwave FDR56 microwave barrier uses a contact-free procedure for detection of point levels. It can be installed in containers, conduits, shafts or on free fall shafts. It is possible to take a measurement through non-metallic container materials from the outside. Suitable as point level switch for controlling and counting all types of bulk solids. It interacts with the Soliwave FQR56 emitter.
Typical bulk solids are: Wood chips, wood dust or flour; plaster, cement, ash; paper or cardboard shred, gravel, sand, dried powders in general, bags and boxes.
-
Process connections: Threads
-
Ambient temperature: -40 to +70°C (-40 to +158°F)
-
Measuring range: Max. 100m (328ft)
-
International explosion protection certificates
Benefits
-
Highly reliable measurement due to flush-mounted installation and possible non-contact installation as well as indication of the signal strength on the transceiver
-
Mechanical robust solution ensures cost savings over the whole life cycle of the product: No wear and tear, process-wetted ceramic sensor diaphragm (optional), long serviceable life, maintenance free
-
Electronics housing can be rotated by 360°, allowing adjustment into optimum position after installation
-
Direct connection of the supply voltage (emitter and receiver separately or together)
-
Mechanically compatible to FQR50/FDR50 microwave barrier, existing process connections can continue to be used; likewise, accessories such as adapter flanges, installation brackets and sight glasses can continue to be used
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.