2.5T 3T TCM FD30T6 Used Diesel Forklift Equipment Japan Toyo Handling Machinery Isuzu Engine Gasoline LPG Fuel

Forklift maintenance is divided into four categories:

That is daily maintenance, first level maintenance, second level maintenance, third level maintenance and daily maintenance.

Daily maintenance is carried out every day, usually after 50 hours of work, the first level maintenance, after 200 hours of work, the second level maintenance and after 600 hours of work, the third level maintenance.

For the new forklift or the forklift that has been out of service for a long time, during the lubrication of the bearings that should be lubricated within two weeks, the new oil should be used to squeeze out all the old oil and lubricate it more than twice. At the same time, the following points should be noted:

1. Before lubrication, the dirt on the oil cap, oil plug and oil nozzle should be removed to avoid dirt falling into the mechanism.

2. When the grease gun is used to inject the lubricant, it should be injected until the parts of each part combine to produce the extrusion lubricant.

3. Seasonal lubricants (engine oil, etc.) should be changed in summer or winter.

Parameter configuration of TCM FD30 Diesel Forklift

Specifications

Dynamic System

Body size

Shanghai LONGHUA CONSTEUCTION MACHINERY Co., Ltd.

Spot sales of 5000 sets of used machinery and equipment, excavators, forklifts, bulldozer, cranes, loaders, graders, road rollers and other construction machinery.
Sales of excavator brands: Komatsu, Carter, Hitachi, Shengang, Doosan, Volvo, Hyundai, Kubota, Sany, Sumitomo, Kato, etc

Tcm1 T / 1.5 T / 2 T / 2.5 T / 3 T / 3.5 tons used diesel forklift FD10 / 15 / 20 / 25 / 30 / 35 / 50 / 60 / 70 / 100 / 250 Japanese original forklift

Spot sale with side shift, middle cylinder, container forklift. The gantry is raised by 3 meters, 4 meters, 4.5 meters, 5 meters, 5.5 meters and 6 meters. used imported brand forklift