HiYi ATEX IECEx Fixed Chlorine Gas Detector with 4-20mA RS485 Output - 210×170×85mm Explosion-Proof
HiYi ATEX IECEx certified fixed chlorine gas detector with RS485 and 4-20mA outputs for continuous monitoring applications.
The MIC500 Series gas detector provides 24-hour continuous online monitoring of multiple gas types with real-time LED concentration display. Capable of detecting over 500 different gas types, this system integrates seamlessly into Distributed Control Systems (DCS) for environmental safety control.
- Explosion-proof construction with fluorocarbon surface treatment
- Wear-resistant design for corrosive environments
- Simple calibration procedures
- Easy integration with control systems
Rapid response and efficient monitoring capabilities for immediate hazard detection.
- Real-time monitoring via wired or wireless transmission
- Three-wire 4-20mA standard signal and RS485 (modbus-RTU) simultaneous output
- Compatible with secondary instruments, PLC, DCS systems
- Data recovery and multiple alarm modes
- Zero-point automatic tracking and multi-level calibration
- Mis-operation recognition for enhanced safety
- Wireless data transmission to mobile devices and monitoring centers
- Pre-treatment systems for various environmental conditions
- Wall mounting bracket and pipe mounting clips (1/2", 3/4")
- Stainless steel threaded welding seats and flanges
- Rain cover and sampling pumps (10m-40m range)
- 24V switching power supply and pressure reducing valve
- Flow meters for precise measurement control
| Parameter | Specification |
|---|---|
| Detectable Gases | Toxic gases, oxygen, carbon dioxide, flammable gases, TVOC |
| Detection Range | 0-1 to 100,000 ppm, 200 mg/L, 100%LEL, 100%Vol |
| Resolution | 0.001ppm to 1ppm depending on range |
| Detection Principle | Electrochemical, catalytic combustion, infrared, thermal conductivity, PID |
| Sensor Life | 2-10 years depending on sensor type |
| Accuracy | ≤±3% F.S (customizable) |
| Response Time | T90≤20 seconds |
| Operating Temperature | -40℃ to +70℃ |
| Operating Humidity | 10-95% RH |
| Display | 1.7-inch high-definition color screen |
| Power Supply | 12-30VDC (standard 24V) |
| Protection Rating | IP65 |
| Explosion-Proof Rating | ExdⅡCT6 (CNEx15.1283) |
| Dimensions | 210×170×85mm (L×H×W) |
| Weight | 1.8Kg |
Chemical plants, power generation facilities, natural gas pipelines, pulp & paper industry, wastewater treatment plants, commercial HVAC systems, acetylene facilities, ice arenas, breweries, and industrial gas monitoring applications requiring fixed installation and continuous online detection.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.