8 Tyres Renew Line Full Automatic For Tires Retreading
8 Tyres Renew Line/Tires Retreading Line/Used Tires Retread Machine
Product parameter
| Model | 8tire multi-functional precure chamber |
| Vulcanizing pot pressure | 0.5-0.6Mpa |
| Automatic complete pressure | 0.7-0.8Mpa |
| Packing set of pressure | 0.4Mpa |
| Temperature | 95-120°C |
| Power | 31kw |
| Curing time | 2.6~3h |
| Dimensions(L*W*H_) | 4100*2300*2100mm |
Initial Inspection Machine
Weight:200 Kgs
Power:1.5Kw,380V,50Hz
Dimension: 1100x750x850 mm
Every single tire casing will receive a thorough inspection identifying potential defects.Using Melion multiple methods to inspect tires for defects and ensure only high quality casings to be retreaded.If repairs are needed, they are administered after inspection.
Buffing Machine
Model:ML-FXM-F
Standard Size: 15'',16'',20'',22.5''
Motor Power: 16Kw
Dimension:1600x1800x2100 mm
The tire’s old tread is mechanically removed on high speed buffers.Melion's buffers are extremely accurate and will remove the proper amount of old rubber while turning the tire to an exact specified diameter and radius.
Rubber Dust Collector
Model: ML-SJG-S
Motor Power: 3 Kw
Weight: 220 Kgs
Dimension: 1600X780X2000 mm
Electricity:380V,50Hz,3 Ph
Usage Description:Collecting Rubber Crumbs which buffed off old tread by Buffing Machine
Multifunctional Repair Stand
Model: ML-XTJ-M
Power: 0.18 Kw
With advances in state-of-the-art repair materials and repair methods, many of these tyres can be routinely repaired and in most cases can be retreaded when the original tread is worn off. The repair station is where any surface injury is treated using effective material and tools for grinding and patching.
Rubber Extruder Machine
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to “fill” the injury. This would create a permanent repair that maximizes tyre life.
Cement Mixing Tank
Usage Description: Engineered with explosion-proof motor,Cement Mixing Tank stir industrial solvent and rubber materials evenly to guarantee the procedure of cement spraying.
Tread Building Machine
In the Pre-cure Tire Retreading System, the Tread Rubber has already been vulcanized with the new tread pattern design. The buffed tire needs a thin layer of cushion gum to be wrapped around its crown area. The Pre-cured Tread Rubber(PTR) is then applied with the building machine. This is called the MELION Building Process.
Envelope Spreader
Monorail System
Model: ML-GDJ-A
Dimension: 4000x1600x2100 mm
Description:
The monorail & hooks system increase productivity by reducing chances of casing contamination and allows for faster loading and unloading of tires.This increases your work place safety and productivity.
Curing Chamber
Model:ML-LHG-12
Dimension: 5500x2100x2350 mm
Heating Power:60 Kw
Usage:The Tires are then placed in Curing Chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.