Platinum Cure Liquid RTV Mold Silicone Rubber Polyurethane Resin Molding Low Viscosity
Platinum Cure Liquid RTV Mold Silicone Rubber Polyurethane Resin Molding Low Viscosity
| Item No. | MCPLA-L15A/B | |
| Appearance | Viscous liquid | |
| Color | Translucent | |
| Viscosity ( cps,approx.) | 7000-9000 | |
| Mix ratio (A:B) | 100:100 | |
| Working time(at 25℃ ,minutes) | 30~40 | |
| Curing time(at 25℃,hrs,approx.) | 4~6 | |
| Hardness Shore A(after 24 h) | 15 | |
| Tensile Strength(Mpa,after 24 h) | 4.2 | |
| Elongation(%) | 550 | |
| Tear Strength(N/mm) | 17 | |
| Linear Shrinkage (%) | 0.1 | |
Platinum Cure Liquid RTV Mold Silicone Rubber Polyurethane Resin Molding Low Viscosity
MCPLA-L15A/B RTV2 platinum cured liquid silicone rubber is a two-part, high-performance elastomer that is used for mold making, casting, and other industrial applications. It is called "platinum cured" because it uses a platinum catalyst to initiate the curing process, which results in a higher quality and more durable end product.
Applications of Platinum Cured Liquid Silicone Rubber Resin Mold Making
Molding applications requiring low shrinkage.
Food grade molds for cake, chocolate, candy, fondant,
and epoxy resin crafts, polyurethane resin crafts moulding
Candle, Soap Moulding
Features of RTV2 Translucent Platinum Cured Liquid Silicone Rubber
-Platinum-based, food safe silicone (environmental friendly, odorless and non-toxic)
-Mixing ration: 1:1, easy to mix
-Easy de-molding
-Excellent tension and tear strength
-High performance in duplication
-Shrinkage is almost zero (below 0.1)
Processing and Instructions of Addition Cured Liquid Silicones Rubber
Step 1
The ideal working temperature is around a constant 25°C. Best results can be obtained at constant temperatures between 21°C and 26°C, in a clean, dry, dust-free environment. Avoid working in high humidity.
Step 2
Measure product in accordance with your intended use. Prepare 1 part A to 1 part B by weight and pour into a clean, smooth-sided container large enough to hold all the liquid and allow room for mixing.
Step 3
The material must be mixed thoroughly for at least 5 minutes. make sure to scrape the container sides, bottom, and corners as you mix. Be careful not to whip excessive air into the mixture.
Step 4
Prepare a container(not silicone material),add the item and keep them face up.
Pour the mixed silicone onto the container and distribute evenly to cover the top of the item by at least 6-7mm
Step 5
Adjust the position and then let it cure, the bubbles will melt gradually.
Step 6
Pull the item out of the mold
Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.
Storage and shelf life of Addition Cured Liquid Silicones Rubber
MC Silicone MCPLA -L Series should be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification.
200kg/drum or 220kg/drum: 4 drums per pallet
MINGCHENG GROUP LIMITED with brand MC Silicone,established in 2011, is a professional manufacturer of silicone mould making and casting materials based in Dongguan, China.
Our professional approach to all our work, together
with creative ideas and strong technical skills, enable us to produce high quality, cost effective materials.
Our products include:
1.Condensation cure silicones for making molds for gypsum, concrete and resin arts and crafts, candle soap and shoe mold,
2.Addition cure silicones for making molds for jewelry, rapid prototype, food grade silicone for chocolates and cakes,life casting silicone.
3.Addition cure silicone putty for equine hoof cushion making, resin crafts mold making.
4.silicone potting compound for electronics encapsulating.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.