Soft RTV2 Platinum Cure Liquid Silicone Rubber Molds Casting 10 Shore A

What is RTV-2 platinum cured liquid silicone rubber

Addition cure silicone rubber Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a flexible rubber. The polymerization can be accelerated by applying heat. The silicone components are delivered as liquids, which once mixed and cured into elastic and resistant material. 

What are the Advantages of RTV-2 platinum cured silicone rubber

#Convenient to operate because the RTV property

#Easy to mix due to the low viscosity (6000~9000Cps)

#High duplication because of high tear and tensile strength

#Long library life with low shrinkage(0.01%)

#Food Safe,Skin Safe, Odor-free

What are the Applications of RTV-2 platinum cured silicone rubber

1.mold making for various materials

polyurethane and other reactive resins

Small pieces of cement,plaster,gypsum,concrete products.

Food like chocolate,fondants,desserts

Wax,candle,soap;

2.casting body parts,silicone dolls ,shoe insole.

Processing and Instructions of Addition Cure Liquid Silicones

Step 1
The ideal working temperature is around a constant 25°C. Best results can be obtained at constant temperatures between 21°C and 26°C, in a clean, dry, dust-free environment. Avoid working in high humidity.

Step 2
Measure product in accordance with your intended use. Prepare 1 part A to 1 part B by weight and pour into a clean, smooth-sided container large enough to hold all the liquid and allow room for mixing.

Step 3
The material must be mixed thoroughly for at least 5 minutes. make sure to scrape the container sides, bottom, and corners as you mix. Be careful not to whip excessive air into the mixture.

Step 4

Prepare a container(not silicone material),add the item and keep them face up.
Pour the mixed silicone onto the container and distribute evenly to cover the top of the item by at least 6-7mm

Step 5
Adjust the position and then let it cure, the bubbles will melt gradually.

Step 6
Pull the item out of the mold

Storage and shelf life
MC Silicone MCPLA -L Series should be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification. In order to preserve best properties it is recommended to follow strictly the following guild lines:
Store the original packing tightly sealed and at a temperature below 30 degree Celsius.
Use the product as soon as the packaging has been opened.