10 shore A platinum cure translucent liquid silicone rubber for soap, candle mold making
Price:
Negotiable
MOQ:
240 kg
Delivery Time:
5-8 work days
Brand:
MC SILICONE
Product Description
Product Description
addition cure silicone rubber is a two-part, platinum-catalyzed, liquid silicone rubber that cures at room temperature. The polymerization can be accelerated by heat. The silicone components are delivered as liquids,which once mixed and cured transform into a translucent, elastic and resistant material.
Specification
The procedure and instruction of making mold (pouring)
Step 1 Handle the original mold
Choose a prefect original mold, Manually polish and smooth the model, clean the surface and dry it. Fixed the original mold in a smooth wooden board, and using 4 pieces wooden board around it to make a square frame.Brushing the release agent evenly on the surface of original mold and wooden board.
4 kinds release agent we often used in condensation silicone mold: Vaseline, soap water, detergent, liquid paraffin(silicone oil also can be used as release agent)
Step 2 Weight part A & part B
According to the mix ratio recommended,weight two parts in Electronic scale with mix ratio 1:1or10:1
Eg: Take 100g part A and 100g part B
Step 3 Stirring the mixture evenly
Remember to mix part A and part B evenly, otherwise, the silicon rubber will be partly solidified and bring problems in your final operation. What’s more, the finished molds will meet a short life.
Step 4 Vacuum pumping(3-5 minutes)
For releasing the air bubbles, after mixing evenly, put the mixture into vacuum pumping for 3-5 minutes, without exception, this step takes less than 10 minutes. Otherwise, it will cause cross-linking reaction, and no more further steps will be available.
Step 5 Pouring
Pouring the silicone rubber into the frame from a corner to make the silicone rubber flow into the frame smoothly.
Step 6 Demoulding(releasing)
After 3-5 hours later, the silicone mold can be demoulded , you’d better demould after 24 hours.
Choose a prefect original mold, Manually polish and smooth the model, clean the surface and dry it. Fixed the original mold in a smooth wooden board, and using 4 pieces wooden board around it to make a square frame.Brushing the release agent evenly on the surface of original mold and wooden board.
4 kinds release agent we often used in condensation silicone mold: Vaseline, soap water, detergent, liquid paraffin(silicone oil also can be used as release agent)
Step 2 Weight part A & part B
According to the mix ratio recommended,weight two parts in Electronic scale with mix ratio 1:1or10:1
Eg: Take 100g part A and 100g part B
Step 3 Stirring the mixture evenly
Remember to mix part A and part B evenly, otherwise, the silicon rubber will be partly solidified and bring problems in your final operation. What’s more, the finished molds will meet a short life.
Step 4 Vacuum pumping(3-5 minutes)
For releasing the air bubbles, after mixing evenly, put the mixture into vacuum pumping for 3-5 minutes, without exception, this step takes less than 10 minutes. Otherwise, it will cause cross-linking reaction, and no more further steps will be available.
Step 5 Pouring
Pouring the silicone rubber into the frame from a corner to make the silicone rubber flow into the frame smoothly.
Step 6 Demoulding(releasing)
After 3-5 hours later, the silicone mold can be demoulded , you’d better demould after 24 hours.
Packing & Delivery
Part A/B: 20kg per drum, 200kg per drum;
20kg/drum;240kg, 480kg/pallet or 320kg, 640kg/pallet.
Storage and Shelf Life
When the silicone rubber is stored at or below 25 degree Celsius in the original unopened containers, Silicone Base and Curing agent have a usable life of 12 months from the date of production. After 12 months’ stockpiles, please use tool to stir the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
1.Store the original packing tightly sealed and at a temperature below 25 degree Celsius.
2.Use the product as soon as the packaging has been opened.
3.Close the lid tightly after taking out the proper amount of liquid silicone rubber.
1.Store the original packing tightly sealed and at a temperature below 25 degree Celsius.
2.Use the product as soon as the packaging has been opened.
3.Close the lid tightly after taking out the proper amount of liquid silicone rubber.
Certifications
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
MINGCHENG GROUP LIMITED
Location
No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China
Contact Person
Julie