Silicone potting compound for electronic encapsulation electronic components

Description of Electronic Potting Silicone Compound& Encapsulates

RTV160 is a two-component room temperature cure potting compound with mix ratio of 1:1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It’s suitable for encapsulating of LED displayers, power module and electronics components, etc.

Features of Electronic Potting Silicone Compound& Encapsulates

Easy mix with 1:1 proportion

Low viscosity, good flow ability

Room temperature cure or heat up cure

Thermal conduction, flame resistance

Without solvent

Using Instructions of Electronic Potting Silicone Compound& Encapsulates

1. Preparing: clean up the coating surface, remove the rust, dust, oil dirt.

2. Pouring: weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.

3. Curing: room temperature cure or heat-up cure is both workable.

It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contactwithmoisture in the air.

Technical datasheet of Electronic Potting Silicone Compound& Encapsulates

Note: Mechanical and electrical performance data tested at 25°C 7 days after curing, relative humidity of 55%; all the tested data is average value.

Packaging of Electronic Potting Silicone Compound& Encapsulates

Packs are available in 20kg and 200kg per drum.

Storage & Transportation of Electronic Potting Silicone Compound& Encapsulates

Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months.

It can be stroked and transported as non-dangerous goods.