Low Heat Release Yellow Resistance Crystal Clear Epoxy Resin For Casting Diy Arts And Crafts

Low Heat Release Yellow Resistance Crystal Clear Epoxy Resin For Making Diy Arts And Crafts

Product description

Epoxy Resin 400-4AB is a TOP coat Food grade epoxy resin that cures under normal and low temperature conditions. It has good leveling, natural defoaming, low viscosity, high hardness and high strength. It can be cured at room temperature or by heating. Dedicated to crystal drop board, marble board, 3D floor insulation, metal floor, kitchen countertop, resin coating, high hardness coating on any surface; and other electronic parts, moisture-proof potting, secret masking, etc.

Advantages
High water clear appearance
High hardness
High gloss
Easy application
Easy to clean

Main Applications
Rhinestone beads
Man made diamond
Man made jewelry
Souvenir

Operation
1. Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2. Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 oC, please heat A glue to 30 oC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3. When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

Lab Equipment