Pourable Condensation-Curing Two Component Silicone Liquid Rubber RTV2 For Shoe Mold Making

Product Description
Silicone liquid rubber is called Tin cure silicone rubber which is also called condensation-cure silicone mold rubber, these are high-tear silicone mold rubbers that are known as the “work horse” of the industry because of their performance and economy. Tin cured silicone molds are used for casting wax, cement, gypsum, polymer modified gypsum, resins, etc.

Application of RTV-2 silicone liquid rubber

A: Cultural relic duplication, architectural decoration, statues
B: Resin crafts
C: Lighting ornaments, candles
D: Plaster, Gypsum,Cement,Concrete decorations
F: Model design, product exploitation, etc.

Features of RTV-2 silicone liquid rubber

1-Liquid silicone rubber for molding has an exceptional fluidity and good operability.
2-Liquid silicone rubber for molding has good Temperature and deformation resistance as well as low shrinkage.
3-Liquid silicone rubber for molding has High duplication times.

Technical datasheet

Instruction of RTV-2 silicone liquid rubber:

How to use the silicone rubber to make a mold

Step 1: Prepare and clean the master piece. Please make sure your original moulds clean and dry.
Step 2: Mixing part A and part B evenly. Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step 3: Vacuum degassing, this step takes less than 10 minutes. Otherwise, it will cause a cross-linking reaction, and no further steps will be available.
Step 4: Pouring or brushing. After released the bubble, we can pour/brush the silicone rubber on the master piece.

Package of RTV-2 Silicone Liquid  Rubber

Part A base silicone: 20kg,25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 800g/bottle, 1kg/bottle

Storage and Precautions of silicone liquid rubber:

RTV-2 silicone rubber for making art crafts, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.