Platinum Cure Translucent RTV2 Liquid Silicone Rubber For Candle, Soap Molds Making 20 Shore A
Platinum Cure Translucent RTV2 Liquid Silicone Rubber For Candle, Soap Molds Making 20 Shore A
Two-component addition type silicone rubber Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a Shore A 5~55 rubber. The polymerization can be accelerated by heat. The silicone components are delivered as liquids,which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.
Features
Convenient to operate because the RTV property
Easy to mix due to the low viscosity (7000~9000Cps)
High duplication because of high tear and tensile strength
Long shelf life with low shrinkage
Can be accelerated for rapid cure
Applications
1. A range of materials can be cast into the cured silicone mold:
polyurethane and other reactive resins
Small pieces of cement,plaster,concrete products.
Food like chocolate,fondants
Wax,candle,soap;
Low melt metal
Technical Properties
| Item No. | MCPLA-L20A/B | |
| Appearance | Viscous liquid | |
| Color | Translucent | |
| Viscosity ( cps,approx.) | 7000-9000 | |
| Mix ratio (A:B) | 1:1 | |
| Working time(at 25℃ ,minutes) | 30~40 | |
| Curing time(at 25℃,hrs,approx.) | 4~6 | |
| Hardness Shore A(after 24 h) | 20 | |
| Tensile Strength(Mpa,after 24 h) | 3.8 | |
| Elongation(%) | 580 | |
| Tear Strength(N/mm) | 16 | |
| Linear Shrinkage (%) | 0.1 | |
Note:
1.Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.
2.Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.
Storage and shelf life
When the silicone rubber is stored at or below 25 degree Celsius in the original unopened containers, Silicone Base and Curing agent have a usable life of 12 months from the date of production. After 12 months’ stockpiles, please use tool to stir the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
1.Store the original packing tightly sealed and at a temperature below 25 degree Celsius.Use the product as soon as the packaging has been opened.
2.Close the lid tightly after taking out the proper amount of liquid silicone rubber.
Use the product as soon as the packaging has been opened.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.