Impression Silicone Putty For Equine Hoof Silicone Putty 65 Shore A
Impression Silicone Putty for Equine Hoof Treatment Silicone Putty 60 shore A
Introduction
Silicone Impression Putty is a hydrophilic addition silicone rubber impression material, Silicone Impression Putty contains two components, Part A is platinum catalyst, and Part B is hydrogen containing polysiloxane. These two-component systems are activated by mixing equal parts together until a uniform color is achieved at which point the hoof is packed and a full pad is applied.
Physical Properties:
| Before Curing | Catalyst Components | Base Components |
| Appearance | White putty | Blue putty |
| Mix ratio | 1:1 | |
| Pot life | 1-2 minutes | |
| Curing time(37C) | <5 minutes | |
| After Curing | ||
| Hardness(Shore A) | 60-65 | |
| Permanent deformation % | <0.2% | |
| Dimensional stability % | <0.25 | |
| Copy details(μm) | <1.5 | |
| tensile Strength Mpa | 2.0 | |
| Temperature stability | 60°C for 1 week | |
| Elongation% | 267 | |
Usage Instruction
1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).
2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.
3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.
4. Close the lid immediately after usage, the cover can not be interchanged.
Storage : Silicone impression Putty has a shelf life of 12 month in original package at a cool dry place.
Package: 350g,500g, 1kg, 5kg, 10kg, 20kg,25kg
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.