RTV2 Platinum Liquid Silicone Rubber For Molding
RTV2 Platinum Liquid Silicone Rubber For Molding
MCPLA-L20 Two-component addition type Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a Shore A20 rubber. The polymerization can be accelerated by heat. The silicone components are delivered as liquids, which once mixed and cured transform into a translucent, elastic and resistant material. Polymerization occurs without formation of heat.
Applications
Polyurethane, Epoxy resin and other reactive resins molds
Small pieces of cement,plaster,gypsum,concrete products.
Food like chocolate,fondants,desserts
Wax,candle,soap;
Low melt metal
Life casting,casting body parts,prosthetics.
Processing and Instructions of Addition Cure Silicones
Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.
Storage and shelf life
MC Silicone MCPLA -H Series should be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification.
| Item No. | MCPLA-L20A/B | |
| Appearance | Viscous liquid | |
| Color | Translucent | |
| Viscosity ( cps,approx.) | 7000-9000 | |
| Mix ratio (A:B) | 1:1 | |
| Working time(at 25℃ ,minutes) | 30-40 | |
| Curing time(at 25℃,hrs,approx.) | 6 | |
| Hardness Shore A(after 24 h) | 20 | |
| Tensile Strength(Mpa,after 24 h) | 3.8 | |
| Elongation(%) | 600 | |
| Tear Strength(N/mm) | 16 | |
| Linear Shrinkage (%) | 0.1 | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.