3150A GGD Type Lv Distribution Panel IP40 For Fixed Wiring
MOQ:
1
Delivery Time:
15 working days
Brand:
KNKONG
Product Description
3150A switchgeat GGD type electrical panel 380V
380V, 50/60 Hz
Modular design, easy assembly
Enclosure: Max. IP40
CCC,ISO9001,GB7251,IEC439
Send us your SLD (Single Line Drawing) or requirements, we design the switchgear plan for you
Inquire
Product Introduction
General
GGD low-voltage switchgear is a GGD type AC low-voltage power distribution cabinet, which is used for fixed wiring low-voltage power distribution cabinets. It is divided into three types: GGD1GGD2GGD3, with different segment current capabilities.
Conditions of Use
1. The relative humidity of the surrounding air does not exceed 5% when the maximum temperature is 40 degrees, and a larger relative temperature is allowed at a lower temperature, which should be considered due to
Temperature changes may occasionally produce condensation effects
2. The equipment is installed in a place where there is no severe vibration and impact, and where the electrical components are not corroded
3. When the user has special requirements, it can be resolved through consultation with the manufacturer
Ordering Information
When ordering, please provide the following information:
1. The full model of the product (including the main circuit plan and the auxiliary circuit plan);
2. Combination sequence diagram and layout diagram of main circuit system;
3. Electrical schematic diagram of the auxiliary circuit;
4. List of components in the cabinet;
5. If users have special requirements, they should negotiate with the manufacturer to solve them;
6. The ordering unit must specify the receiving unit, settlement unit, settlement method, arrival and delivery method
7. If you need a bus bridge, please specify.
Features
1. According to the purpose, it is divided into: power receiving cabinet, busbar connection cabinet, feeder cabinet, motor control cabinet, reactive power compensation cabinet, lighting power distribution cabinet.
2. Cabinet structure:
(1) The cabinet frame is partially welded and assembled with 8MF cold-formed steel. The frame has mounting holes arranged according to the modules of E=20mm and E=100mm to improve the versatility of product assembly.
(2) The ZMJ type busbar clamp, which is thermoformed with high flame-retardant PPO material, has a modular structure with high mechanical strength and insulation.
(3) The 1000mm and 1200mm wide cabinets adopt a symmetrical double-door structure on the front, and the 600mm and 800mm wide cabinets adopt a whole door structure. The back of the cabinet adopts a symmetrical double-door structure. The cabinet structure is not installed against the wall.
(4) The cabinet door is connected to the frame with a galvanized shaft hinge, which is convenient for installation and disassembly. There are rubber inserts at the folding edge of the door.
(5) The grounding knurled screw structure is used between the installation parts in the cabinet and the frame to form a complete grounding protection circuit.
(6) The top cover of the cabinet body can be removed when needed to facilitate the assembly and adjustment of the main bus.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Knkong Electric Co.,Ltd
Location
No. 25 Street , Hanghai Road, Zhengzhou,Henan,China
Contact Person
Ken Chan (English)