SMTCL HTC40Q Heavy-duty Processing 8mm Cutting CNC Lathe for Automotive Axle & Shaft Parts
Price:
Negotiable
MOQ:
1
Delivery Time:
45-60 days
Brand:
SMTCL
Product Description
SMTCL Heavy-duty Processing Single-sided Cutting 8mm HTC40Q CNC Lathe For Automotive Axle & Shaft Parts
Shenyang Machine Tool HTC40Q: SMTCL Heavy-duty Processing Single-sided Cutting 8mm HTC40Q CNC Lathe is a new generation upgraded CNC horizontal lathe, optimized and upgraded under the leadership of a team of national craftsmen. Relying on the intelligent manufacturing capacity of Shenyang Machine Tool's national-level intelligent factory, it has achieved all-round improvement in rigidity, precision and stability. It is specially designed for the efficient, mass and high-precision machining of shaft and disc parts, and is widely applicable to automobile, motorcycle, electronics and other industries, particularly meeting the strict requirements of automotive component machining.
Core Advantages and Key Parameter Highlights
- The bed structure features high rigidity and stability; equipped with a large-span and high-rigidity main spindle, a 15/18.5KW high-torque main motor, and a 100mm center height tool rest, enabling high-rigidity cutting
- The entire machine is designed for thermal balance. The product is of batch CMK2.0 (IT6 grade), with a repeat positioning accuracy of 0.003mm, and the main shaft conical surface runout is ≤ 0.002mm
- Configurable servo tail table, operates at high speed, without impact clamping, eliminating defective and damaged products, thereby enhancing processing efficiency
Product Performance
High Rigidity:
- A2-8 spindle sleeve-type spindle unit
- 15/18.5KW high-torque main motor
- 100-meter high cutter head tool carrier
Cutting Capabilities:
- Tailstock slot: 4mm deep, 7mm wide
- U-drill cutting diameter: 45-50mm
- 250 diameter bearing ring cutting
Efficiency Features:
- Spindle speed: 3500 rpm
- Two-axis rapid movement speed: 30 m/min
- High-efficiency servo turret
Target Industries
- Pump motor industry: Motor shaft, end cover
- General industry: Flange
- Bearings industry: Outer ring, inner ring
Technical Specifications
| Project | Unit | HTC40H(Q)/500 | HTC40H(Q)/1000 |
|---|---|---|---|
| Max. cutting dia. | mm | Φ380 | Φ380 |
| Max. cutting length | mm | 500 | 1000 |
| Max. swiming dia. over bed | mm | Φ560 | Φ560 |
| Max. swiming dia. on slide | mm | Φ350 | Φ350 |
| Spindle | |||
| Spindle nose model | A2-8 | A2-8 | |
| Front bearing inner dia. | mm | 100 | 100 |
| Spindle taper and hole size | 1:20;Φ70 | 1:20;Φ70 | |
| Dia. of spindle hole | Φ65 | Φ65 | |
| Max. bar dia. | mm | Φ50 | Φ50 |
| Standard chuck dia. | inch | 10 | 10 |
| Spindle speed range | r/min | 3500 | 3500 |
| Rated spindle torque | N*m | 180 | 180 |
| Spindle Max. torque | N*m | 220 | 220 |
| Main motor output power continuous/15 min. | kW | 15/18.5 | 15/18.5 |
| X/Z axis | |||
| X/Z axis rapid movement | m/min | 30 | 30 |
| X axis travel | mm | 200 | 200 |
| Z axis travel | mm | 560 | 1050 |
| Tailstock | |||
| Tailstock travel | mm | 350+100 | 350+100 |
| Tailstock drive method | Hydraulic drive | Hydraulic drive | |
| Tailstock taper hole taper | Morse | MT-4 | MT-4 |
| Turret | |||
| Turret type | Horizontal 8-station servo turret | Horizontal 8-station servo turret | |
| Center height | mm | 100 | 100 |
| Turret indexing repeat positioning accuracy | Sec. | ±1.6 | ±1.6 |
| If could choose tool nearby | yes | yes | |
| Others | |||
| Distance between spindle center and floor | mm | 1015 | 1015 |
| Machine tool net weight | kg | 4200 | 4750 |
| Total electrical capacity | KVA | 27 | 27 |
| Overall dimensions (LxWxH) | mm | 2850×1910×1980 | 3620×1890×1900 |
Note: The parameters provided in the table are for reference only. If there is any change, please refer to the actual product.
Configuration Options
Standard Configuration: FANUC-0i-TF Plus (5) System (H/S Series), GSK988TA System (Q Series), Sleeve-type spindle, Hollow chuck oil cylinder, 8-station servo tool carriage
Optional Configuration: Siemens system, Tool setting gauge, 12-station servo tool carriage, Workpiece measurement, Power tool carriage, Oil mist collector, Rear chip removal unit, Tool damage detection, Pneumatic door
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shanghai HD ME Tech Co., Ltd.
Location
No.28, Moyu Road, Jiading District, Shanghai,China
Contact Person
Julia