M3002-26470 PHiliph X2 Patient Monitor parts HIF Board With Plastic Battery Lever Stop
M3002-26470 PHiliphh X2 Patient Monitor HIF Board With Plastic Battery Lever Stop
Specification
| Weight | 1.5kg (3.3 lb) |
| W*H*D | <188*99*86mm (7.4*3.9*3.4in) |
Environmental Specifications
| Item | Condition | Range |
| Temperature Range | Operating | 0 to 40°C (32 to 104°F) |
| Storage including transportation | -20 to 60°C (-4 to 140°F) | |
| Temperature Range with the Wireless IntelliVue Adapter or IntelliVue Instrument Telemetry Wireless Network or when charging the battery | Operating | 0 to 35°C (32 to 95°F) |
| Humidity Range | Operating | 15% to 95% Relative Humidity (RH) |
| Storage including transportation | 5% to 95% Relative Humidity (RH) |
Maintenance activities and test plans.
The following activities may only be performed by qualified PHiliphh service personnel. All maintenance tasks and performance tests are detailed in the service documentation on the monitor documentation CD. Make sure these tasks are performed in accordance with the monitor's maintenance schedule or local laws. If you need a safety or performance test of your monitor, please contact a PHiliphh authorized service center. Before testing or repairing the device, clean and disinfect the device to remove contaminants.
Troubleshooting
If you suspect a problem with a single measurement, read the instructions for use and verify that the measurement is set correctly. If you suspect an intermittent problem with the system, contact your service representative. The information can be requested from the National Registry. To view the status log,
1 From the Settings main menu, select Versions.
2 Select Status Log in the Review Monitor window to view the status log.
Disposing of the Monitor
Warning
The monitor has been properly sanitized and disinfected before disposal according to your country's laws for equipment containing electrical and electronic components to prevent contamination of people, the environment or other equipment. When disposing of parts and accessories, such as B. thermometers, local regulations for the disposal of medical waste, unless otherwise specified.
Disposal of empty calibration gas cylinders
1. Fully deflate the cylinder by pushing in the control valve pin or pulling out the inflation valve pin with a tire valve stem wrench or needle-nose pliers.
2. When the bottle is empty, remove the dipstick from the fill port (or regulator) or puncture the bottle.
3. Label the bottle with the word "empty" and dispose of it properly as scrap.
Warning
Make sure the cylinder is completely deflated before removing the valve stem or drilling into the cylinder.
If you're interested in M3002-26470 PHiliphh X2 Patient Monitor HIF Board With Plastic Battery Lever Stop ,feel free to contact us .Thank you .
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.