009-002126-00 Mindray Imec10 Patient Monitor Parts Battery Board Flex Cable

009-002126-00 Mindray Imec10 Patient Monitor Battery Board Flex Cable

Maintenance and Cleaning

overview

Please keep your device and its accessories free of dust. To prevent damage to the equipment, be sure to observe the following:

﹒Dilute cleaners and disinfectants according to the manufacturer's directions, or use the lowest concentrations possible.

﹒ Do not immerse the device in liquid.

﹒ Do not pour liquids on the device or accessories.

﹒ Do not allow liquids to enter the cabinet.

﹒ Do not use abrasive materials such as steel wool or silver polish, nor any strong solvents such as acetone or cleaners containing acetone.

warn

Before cleaning the device, the power must be turned off and the power cord disconnected from the outlet

Be careful

If you accidentally pour liquid on the device or accessories, please contact the maintenance personnel or our company immediately

Notice

To clean or sanitize a reusable accessory, see the instructions provided with the accessory.

clean

The equipment should be cleaned regularly, and the frequency of cleaning should be increased in areas with severe environmental pollution or heavy sandstorms. Before cleaning, please consult or learn about the hospital's regulations on equipment cleaning. The following cleaners are available:

﹒ Sodium hypochlorite (bleach powder for washing)

﹒ Hydrogen peroxide (3%)

﹒ Ethanol (70%)

﹒ Isopropyl Alcohol (70%)

When cleaning the device:

1. Turn off the power and disconnect the power cord.

2. Use a soft cotton ball to absorb an appropriate amount of detergent and wipe the display screen.

3. Use a soft cloth to absorb an appropriate amount of detergent and wipe the surface of the device.

4. If necessary, wipe off excess detergent with a dry cloth.

5. Place the device in a ventilated and cool environment to air dry. If you need to clear the touch screen during monitoring, please lock the touch screen first.

Disinfect

Disinfection operations may cause some degree of damage to the monitor. Disinfection is recommended only when deemed necessary in your hospital maintenance. Equipment should be cleaned prior to disinfection. Recommended disinfectants are: 70% ethanol, 70% isopropanol.

If you're interested in 009-002126-00 Mindray Imec10 Patient Monitor Battery Board Flex Cable ,feel free to contact us .Thank you .