Mindray PM7000 Patient Monitor Parts VGA Connector With Cable 7000-20-24503A

Mindray PM7000 Patient Monitor VGA Connector with Cable 7000-20-24503A

► Brief Introduction

This VGA Connector is for External display of Mindray PM7000 patient monitor. A standard color VGA monitor can be connected to the patient monitor through this connector.And VGA have to select the right size according to the TFT size being used.

► VGA MONITOR

Monitor interface for external standard VGA color monitor.

Please pay attention to the following instructions when installing the VGA monitor:

1. The VGA monitor should be installed 1.5 meters from the patient. It is intended as an assistant monitoring device.
2. Plug the cable in corresponding socket before VGA monitor is electrified.
3. Power on at the same time, or power on the monitor after VGA.
4. Adjust brightness and contrast properly.

► Connecting to VGA Monitor

This monitor can be connected with a standard color VGA monitor. The VGA monitor will display the patient waveforms and parameters measured by the patient monitor. To connect the patient monitor with the VGA monitor, follow the steps as below.

1. Power off the patient monitor.
2. Connect the signal cable of the VGA monitor to the VGA connector on the rear panel of the patient monitor.
3. Power on the VGA monitor and then the patient monitor.

The VGA monitor should be installed at a distance of more than 1.5 m from the patient.

► Sensitivity selection

• 1.25mm/mV (×0.125),
• 2.5mm/mV (×0.25),
• 5mm/mV (×0.5),
• 10mm/mV (×1),
• 20mm/mV (×2)
• Auto

► Specification

► Repair Service

In addition to engaging in medical devices, accessories and repair parts sales business, we also specialize in repairing that kind of machines and modules. Since we are proficient in hospital equipments maintenance technology, we are skilled in refurbishing damaged machines and accessories. Therefore, if you have this kind of machines or modules for repair, you can contact us and sent us, we will get them repaired at the fastest speed. But it is worth noting that you must ensure the item that need repair is unopened and has never been repaired before. Otherwise it is unacceptable to us. In conclusion, please kindly check your item carefully before send it out.

Thank you for your time! If you are interested in Mindray PM7000 Patient Monitor VGA Connector with Cable 7000-20-24503A, please let us know. Welcome to place your orders.

Thank you for your time and interest.