Metrax Primedic M240 DM1 Defibrillator AC Charging Interface

The frequency of alternating current refers to the number of periodic changes it makes per unit time. The unit is Hertz (Hz), which is inversely related to the period. The frequency of alternating current in daily life is generally 50 Hz, while the frequency of alternating current involved in radio technology is generally larger, reaching the measurement of kilohertz (KHz) or even megahertz (MHz).

Most defibrillation monitors are both AC and DC. When AC power is used, the internal circuit automatically converts to AC/DC function and charges the battery at the same time.

The defibrillator will record the rescue process, monitoring information, and equipment status information and can be automatically uploaded to facilitate centralized management and reduce manual entry. Through third-party systems such as direct connection, central station, eGateway and HIS/EMR/PACS, the networking method is simple and flexible, integrating clinical information and patient information to improve diagnosis and treatment efficiency.

Quick Detail:

1. AC power supply: 100V-240V, 50Hz/60Hz, built-in rechargeable lithium battery
2. Working temperature 0-45 degrees Celsius;
3. Storage temperature -20-70 degrees Celsius；
4. Ambient humidity: 0-95%
5. Maximum operating and storage altitude 15,000 feet (4,500 meters)
6. Waterproof/anti-solid particles: reaches protection level IP21

► Working principle

Press the charging button to charge the selected energy and be ready to discharge. The indicator light keeps flashing, indicating that the charging process is in progress. Charging time depends on the selected energy level and remaining battery energy. Charging to 360 Joules takes approximately 7 seconds. Energy is available within 15 seconds of charging. This will be indicated by a continuous chirp and the lighting of the OK signal light. If defibrillation does not occur within this time, an internal safety discharge will be performed. The defibrillator then returns immediately to an operational state. If a malfunction occurs during charging, the alarm will emit an intermittent chirp and the warning indicator light will light up. If the fault indicator light suddenly lights up, you can press the shutdown and restart keys to check the instrument function with the help of self-test. After the indicator light goes out, the instrument can continue to work.

 features:

About delivery:

We default to express delivery by DHL. We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.