Biocare PM-900 Patient Monitor Front Panel Housing Cover Casing

Biocare PM-900 Patient Monitor front panel

► About Biocare PM-900 Patient Monitor front panel

The front panel of the Biocare PM-900 patient monitor typically includes a variety of buttons, knobs, and a display screen. Buttons and knobs can be used to control various settings and functions of the monitor, such as setting alarms, configuring parameters, and navigating menus.

The front panel display provides real-time monitoring of vital signs and other patient data, such as heart rate, blood pressure, temperature, and oxygen saturation levels. It can also display waveforms of different parameters for easy viewing and analysis.

► Biocare PM-900 Patient Monitor front panel Specification

► Front View

.

1.Handle

2.Physiological Alarm Indicator Lamp

•  Red with a high flicker frequency: a high-level alarm.
• Yellow with a low flicker frequency: a middle-level alarm.
• Constantly yellow without flicker: a low-level alarm.
•  Blind: no physiological alarm.

3.Display Screen

4.Power Switch

• Turn on: press this button to start the monitor after A.C. power connection.
• Shut down: press this button to shut down the working monitor (the shut-down time lag depends upon the manufacturer's preset).

5. Battery Power Indicator Lamp

• On: power is supplied by the battery.
• Off: battery is not in use

6. Battery Charging Indicator Lamp

• Battery is charged: Lights flickers;
• The charge is finished: Lights steadily;
• Power is supplied by the battery: Light is off.
•  Battery is absent: Light is off

7. Alarm silence button

Press this button to silence the alarm. will be displayed in the information area. Other sounds (such as button presses and SRO sounds) are not affected

8. Alarm pause button

Press this button to pause the alarm. will be displayed in the information area. Press again to reset the alarm.

9. Freeze button

Press this button to freeze the waveform on the screen in regular operation mode. Press again to unlock the frozen waveform.

10.  Record button

If your monitor has a recorder, press this button to record the waveform in real time. Press again to stop recording.

11.  NIBP button

Press this button to start or stop NIBP measurement

12. Main menu button

Press this button to display the main menu if it is not displayed on the screen; Press this button to return to the Home screen if the Home menu is displayed on the screen.

13 Shuttle

Rotating: the cursor can be moved by rotating the shuttle clockwise or counter-clockwise.

Pressing: some menus can be entered or some functions can be chosen by pressing the push button

Thank you so much for your attention .If you're interested in Biocare PM-900 Patient Monitor Front Panel Housing Cover Casing ,feel freet to contact us .Thank you .