Nihon Kohden TEC-5602 Defibrillator External Paddle Tray Metal 

►Quick Detail:

Before opening the device, please perform the following checks:

1. Check for any mechanical damage and ensure that all external cables and accessories are correct
There is a connection.
2. Connect the power cord to an AC power source. If you are using battery power to operate the device, please ensure that

The battery is fully charged. If you run the device on a DC power supply, we can use a DC/AC adapter
Supply should be used.
To turn on the device, please turn the mode selection knob to the desired mode.
After starting the screen display, the device emits a buzzing sound and the alarm light lights up at the same time
Yellow, then turn red, and then turn off.
If the device is turned on by entering AED mode or manual defibrillation mode, the alarm system will be turned off
When the alarm light goes out.
If the device is turned on by entering pacemaker mode or monitor mode, the alarm system will be activated
When the alarm light goes out.

►Precautions:

The operating environment of the equipment must comply with the requirements specified in this manual.
The equipment usage environment should be reasonable and free of noise, vibration, dust, and corrosiveness,
Flammable and explosive substances. If the equipment is installed in a cabinet, there is sufficient space in the front and back
Space should be left for easy operation, maintenance, and repair. In addition, to maintain good ventilation,
The equipment should be at least 2 inches (5 centimeters) away from the perimeter of the cabinet.

When disposing of the packaging material, be sure to observe the applicable waste control regulations and keep it out of children’s reach. • The equipment might be contaminated during storage and transport. Before use, please verify whether the packages are intact, especially the packages of single use accessories. In case of any damage, do not apply it to patients.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex,etc.We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.