ZOLL M Series Defibrillator Printer Head Assembly 9310-0510REV Medical Equipment Used Defibrillator Parts

ZOLL M Series Defibrillator Printer Head Assembly 9310-0510REV Medical Equipment Used Defibrillator parts

Brief Introduction

Some M-Series products may have an optional on-demand pacemaker, which consists of a pulse generator and ECG acquisition circuitry. The pacemaker's output current varies continuously between 0 and 140 mA and its frequency varies continuously between 30 and 180 pulses per minute (ppm). The stimulation pulses are delivered to the heart via specially designed ZOLL MFE pads in the back and precordium. The characteristics of the output pulses and the design and placement of the electrodes minimize cutaneous nerve stimulation, the threshold current for cardiac stimulation, and reduce the discomfort caused by skeletal muscle contraction. The unique design of the M-Series products allows for clear display and interpretation of electrocardiograms (ECGs) on the display without offset or distortion during external stimulation. Proper operation of the device as well as correct placement of the electrodes are critical to achieving optimal results. Each operator must be thoroughly familiar with this operating manual.

Specifications

Repair Service

As an experienced medical device industry expert, Apart from specializing in selling medical devices, accessories and repair parts such as patient monitor, defibrillator machine, patient monitor printer, ECG machine, EKG machine, main board, batteries and so on, we also engage in providing medical equipments or modules repair service.

So if you have any that sort of machine or modules which in need of repair, please feel free to contact us at any time. Moreover, what need to pay attention to is that you have to make sure the repair item is unopened and has never been repaired before. And items lack of component is unacceptable. Accordingly, check out your item before shipping.

Install printing paper

Unscrew the wrench on the upper right corner of the printer door, open the printer door, then load the printing paper into the paper cavity, align the paper head outside the paper outlet, close the printer door, and check whether the position of the printing paper is consistent with the paper output. Oral alignment.

Note

The paper used by this printer is thermal printing paper. If it is not thermal printing paper, it may result in inability to print, poor print quality or damage to the thermal print head. Do not pull the printing paper outward during printing, otherwise the printer may be damaged.

Thank you for taking the time to pay attention to our ZOLL M Series Defibrillator Printer Head Assembly 9310-0510REV Medical Equipment Used Defibrillator parts product.