Innomed Cardio-Aid 200-B Defibrillator High Voltage Board R-1705
| Attribute | Value |
|---|---|
| Product Name | Innomed Cardio-Aid 200-B Defibrillator High Voltage Board R-1705 |
| Input Voltage | 12 VDC |
| Ac Line Powered | 100-240 VAC, 50/60 Hz, 1.5A (Class 1) |
| Application Area | ICU, medical equipment |
| Country Of Origin | China |
| Shipping Time | 3-5 days |
| Warranty | 90 Days |
| Usage | Emergency medical equipment |
| Payment Term | Full before shipment |
| Inventory Situation | Sufficient inventory |
The system voltage from the power fusion circuitry powers the high voltage generator, which is controlled by the safety logic. In monitoring mode, the generator is turned off and the high voltage capacitors are short-circuited via the discharge/drain resistors located on the Defi board.
When the high voltage charge sequence is started, the primary channel starts the generator and controls the voltage charge of the capacitors. The auxiliary channel acts as a safety processor during the entire defibrillation process.
| Brand | Innomed |
| Part No | R-1705 |
| Compatible With | Innomed Cardio-Aid 200-B Defibrillator |
| MOQ | One piece |
| Condition | Used |
Before handling high voltage components such as high voltage capacitors, high voltage circuits, etc., use a high voltage probe (1000:1) to ensure that there is no voltage on the high voltage capacitors. High voltage components are marked with the "Danger High Voltage" symbol.
When connecting the high voltage probe, be careful not to touch the terminals and use suitable insulating material. When voltage is present, place the unit in a fully discharged high voltage capacitor state. If the capacitor is still charged, it can be discharged by connecting a drain resistor (e.g. 100 kOhm, 17 W) directly to the high voltage capacitor terminals for at least 30 seconds.
When storing high voltage capacitors, always place them in a short circuit state. When reassembling the Cardio-Aid®, ensure that each rubber gasket is properly positioned.
- Do you have probe test video?
Yes, before shipping, we will send you test video to confirm. - Do you have cheaper probe?
It depends. It's better to offer your budget, then we will help you check the stock. - How long is your warranty?
Our warranty is 90 days. It will be appreciated to test it as soon as possible once receiving the package. For any after-sales problem, feel free to contact us. We will help you solve it. If over the warranty time, the cost will be bored by yourself. - Do you offer probe repairing service?
Yes, we do, we can help repair the probe. Before repairing, please offer the problems. It's better to offer videos so we will figure out the cost.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.