Original PHiliph C-CODE011D Encoder for UT3000A Patient Monitor - Tested & Guaranteed
Original replacement C-CODE011D Encoder for PHiliph UT3000A Monitor - Tested & Guarantee
This product is an original encoder for the PHiliph UT3000A monitor, a salvaged part from medical equipment. The encoder is in excellent condition, showing almost no signs of use and appearing brand new. Our engineers have repeatedly tested Used C-CODE011D encode, and its functionality is excellent. Its new appearance indicates minimal use and a long lifespan. At a lower price, it is the best choice to replace the original encoder.
As seen in the actual photos, the encoder's model number is C-CODE011D, which is its identification standard. Before purchasing, please confirm that the encoder model number matches yours.
The silver knob on the C-CODE011D encoder is mainly used to adjust the parameters/functions of the UT3000A monitor. Buy the C-CODE011D Encoder for PHiliph UT3000A patient monitor. This is an original used encoder salvaged from medical equipment, fully tested, and guaranteed to work.
- Parameter Adjustment Control: By rotating the encoder C-CODE011D, operators can precisely adjust monitor parameters, screen brightness, and other functional indicators, replacing traditional buttons for continuous data adjustment.
- Interface Switching: Adjusting the encoder allows for switching between device interfaces and monitoring modes, improving operational efficiency for medical staff.
- Signal Transmission Feedback: As seen in the physical image, a small circuit board is mounted beneath the encoder C-CODE011D. This board converts the mechanical rotation into electrical signals, transmits them to the main board, and provides feedback on the operation results, enabling parameter setting.
| Product name | encoder |
|---|---|
| Model | C-CODE011D |
| Type | Parts |
| Compatible model | PHiliph UT3000A monitor |
| Material | Metal +Plastic |
| Color | Silver |
| Size | Small |
| Condition | Original with good condition |
| MOQ | 1 piece |
| Package | 1pc/carton |
Q1: Why is my PHiliph UT3000A Encoder not working or not responding?
A1: Please check the connection to the motherboard. If the connection is secure but there's no signal, the internal contacts may be damaged—this is why you need our tested replacement.
Q2: What are the steps for replacing an encoder?
A2: It's recommended to replace it under the guidance of a professional. First, disconnect the device power, then remove the device casing, locate the encoder to be replaced, remove the connecting cables around the encoder, and note the cable connection positions. Then install the new encoder, paying attention to the installation position and connecting cables; it must be completely restored and not arbitrarily replaced. Afterward, restore the casing, and finally test if the encoder can adjust the data normally.
Q3: What aspects should be checked after replacing the encoder?
A3: After replacing the encoder, check the encoder's rotation function, parameter adjustment, and interface switching functions to ensure they are effective. Also, check the maximum value adjustment of the encoder (when adjusting to the maximum value, the parameters should no longer change when rotating the encoder again; avoid unlimited adjustment that could lead to abnormalities.)
| Payment Methods | Bank Transfer / PayPal / Western Union |
|---|---|
| Shipping Methods | DHL / FedEx |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.