Replacement Knob for PHiliph UT3000A Monitor - Control Knob for Menu Navigation & Parameter Adjustment
Replacement Knob for PHiliph UT3000A Monitor - Control Knob for Menu Navigation & Parameter Adjustment
The PHiliph UT3000A monitor knob is a dedicated knob for the UT3000A monitor. It has no specific model number and is designed specifically for the UT3000A. Made of ABS plastic, the knob is hard, highly wear-resistant, and suitable for use in medical environments with frequent sterilization. However, it is a frequently used and easily worn component. If your knob requires repair, you can purchase this repair knob.
The knob is located below the device's display screen and is primarily used for adjusting device parameters, menu navigation, and mode switching. It is simple to operate and offers multiple functions.
Key Features
-
1. Menu Navigation: Rotate the knob to switch menu options; press to confirm.
2. Parameter Adjustment: After selecting a parameter, rotate the knob to precisely adjust the value (screen brightness, alarm threshold, etc.) to suit clinical needs.
3. Interface Switching: Quickly switch between multi-parameter monitoring interfaces and waveform display modes to improve operational efficiency.
4. Auxiliary Controls: The knob can be used in conjunction with buttons to perform combined operations such as alarm muting, waveform freezing, and data saving.
|
Product name |
knob |
|
Machine Model |
UT3000A |
|
Condition |
Tested & Guaranteed |
|
Warranty |
90 days |
|
Size |
Small |
|
Weight |
About 50g |
|
Shipping by |
DHL/FedEx/UPS/Etc. |
|
Shipping time |
7-10 days |
|
Payment terms |
Bank TT/ Paypal /Western Union |
1. Power Off Preparation
Turn off the power, disconnect the power cord and sensor, and let it stand for 5 minutes to release residual power.
2. Remove the Front Frame
Unscrew the front frame screws, gently pull the front frame while being careful of the internal cables, and rotate it to an operable angle.
3. Remove the Old Knob
Locate the knob assembly (usually inside the control panel), disconnect the connecting cable/unplug the connector; unscrew the fixing screws or release the clips, and remove the old knob (if it is soldered, it needs to be desoldered with a soldering iron).
4. Install the New Knob
Align the new knob with the holes and fix it in place (screw fixation/clip tightening). For soldered knobs, the pins need to be precisely soldered; connect the cable and ensure the connector is secure.
5. Reset Test
Reinstall the front frame and tighten the screws, turn on the power, and test the rotation adjustment and press confirmation functions to ensure they are normal. If there is no jamming/no response, the replacement is successful.
| Payment Methods | Bank Transfer / PayPal / Western Union |
|---|---|
| Shipping Methods | DHL / FedEx |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.