Nihon Kohden ECG-1350P ECG machine display screen and operation button board 6190-904979A UT-2446

► Brief Description

 The ECG machine display screen and operation button board, part number 6190-904979A UT-2446, is compatible with the Nihon Kohden ECG-1350P ECG machine. The board is green, rectangular, and made of metal. It features the brand logo and original serial number, confirming its original manufacturer status. It has a row of function keys, fully compatible with a keyboard, allowing users to directly input commands via the keyboard, which are then transmitted to the motherboard and sent to the ECG machine.

► Specifications

 
►Detailed Photos
 

►Button Panel Functions and Layout

1.Power Switch: Located prominently on the panel, used to turn the device on and off. A long press powers on and enters the static ECG examination screen.

2.Patient Key/ID Input Key: Used to enter the patient's medical record number and personal information. The operation procedure is as follows: After pressing the "Patient Key," the ID cursor appears. Enter the medical record number using the number keys, and then press the "Input Key" to set basic information such as gender.

3.Review Key: When the user detects an abnormal waveform on the screen, pressing the "Review" key will record the ECG waveform that has passed but was not printed in time, helping doctors to detect occasional abnormal heart rhythms.

4.Paper Feed/Mark Key: Used for paper feeding. Pressing this key starts paper feeding, and it automatically stops upon detecting a mark. If the switch is pressed again during paper feeding, paper feeding will stop immediately, regardless of the mark.

5.Input Key/Confirm Key: Used to confirm various operation inputs, including confirming patient information and selecting examination modes.

6.Direction/Selection Keys: Used for navigating and selecting from menu options.

7.Record/Stop Key: Controls the start and stop of ECG recording.

►Installation Steps

1. Disconnect Power: Always disconnect all power connections to the ECG-1350P and remove the battery to prevent circuit damage.

Tools Needed: A precision Phillips screwdriver and anti-static wrist strap or gloves are usually required.

2. Remove the Old Button Board: Unscrew the screws on the casing and carefully open the ECG-1350P casing. Locate the button board's ribbon cable connector on the motherboard. Disconnect one end of the connector from the motherboard, then gently remove the connector from the button board itself. Unscrew the screws and remove the old button board from the machine.

3. Install the New Button Board: Align the new button board and insert it into the designated position, tightening the screws. Connect the ribbon cable to one end of the button board first, then securely insert the other end back into the motherboard connector.

4. Functional Testing and Assembly: Before closing the casing, connect the power and test the device. Press each button one by one to check its functionality and responsiveness.

After confirming that all functions are working correctly, turn off the power, close the casing, and tighten all screws.

►FAQ

Q: What is your terms of payment?

A: Western union, Paypal, T/T in advance.

Q: How to install it?

A: Our engineer can send you a tutorial video to show you how to install it.

Q: What is your terms of delivery?

A: DHL,UPS,FedEx,also can use customer's freight forwarder.

If you have any question about the Nihon Kohden ECG-1350P ECG machine display screen and operation button board 6190-904979A UT-2446, please contact us freely. Looking forward to receiving your inquiry.