Main Power Board Wiring Harness For Nihon Kohden BSM-4113K Patient Monitor Internal Connection Cable With 6-Pin Connectors

Main Power Board Wiring Harness For Nihon Kohden BSM-4113K Patient Monitor Internal Connection Cable With 6-Pin Connectors

• Product Description

• Product Specifications

• The function of the product

This wiring harness serves as the "vein" of the patient monitor's power system. Its primary function is to transmit low-voltage DC power from the main power supply board to the system motherboard. It also carry control signals that allow the main board to communicate with the power supply unit (e.g., battery charging status or AC/DC switching). A faulty harness can lead to the monitor failing to turn on, intermittent power loss, or error messages regarding the power supply.

• Use tips
• Safety First: Always disconnect the monitor from the AC mains and remove the battery before opening the case.
• Disassembly: Remove the rear screws of the BSM-4113K to open the housing. Locate the main power board.
• Replacement: Gently unplug the old harness from both the power board and the receiving board. Note the routing path of the cable.
• Connection: Plug in the new wiring harness, ensuring the clips lock into place. Reassemble the monitor.
• Testing: Power on the device to verify that the display and parameter modules function correctly.