Masima M-LNCS DCI Spo2 Sensor Adult Reusable Finger Clip REF2501 New Original

Masima M-LNCS DCI Spo2 Sensor REF2501-Adult Reusable Finger Clip New Original

► Brief Description

The M-LNCS DCI Spo2 Sensor REF2501, white in color and made of silicone, monitors blood oxygen saturation in the range of 70%-100%. It is a reusable finger clip-on blood oxygen sensor for adults, complete with its original packaging. It measures 3ft/0.9 meters in length and uses an M-LNCS 15-pin D-sub connector at the distal end. While providing high-performance blood oxygen monitoring, it effectively reduces signal interference, ensuring data accuracy and consistency. Unlike traditional Spo2 sensors, the M-LNCS DCI sensor can identify and separate venous blood signals, eliminating noise through an adaptive filter to extract the true arterial blood oxygen saturation signal. It maintains accurate monitoring during electrosurgical procedures, operates normally in strong ambient light (including surgical lights and sunlight), and exhibits excellent monitoring capabilities even during patient movement and in cases of low blood perfusion. It is perfectly compatible with Radical-7, Rad-5/Rad-5v, Rad-87, Rad-57, Root patient monitoring system, etc.

It has obtained ISO 80601-2-61:2011, ISO 10993 series biocompatibility standards, and RoHS compliance certifications.

► Specifications

►Detailed Photos

►Key Advantages:

1.Excellent Anti-interference Performance: Whether in the electromagnetic interference environment of electrosurgical equipment or under strong surgical lights or natural light, this sensor ensures accurate blood oxygen readings.

2.Precise Monitoring Under Motion and Low Perfusion Conditions: It can accurately monitor stable data even for unstable patients in the ICU or the most difficult-to-monitor young patients in the neonatal intensive care unit.

3.Stable Monitoring Despite Skin Pigmentation Differences: The RD SET sensor exhibits a blood oxygen measurement deviation of only 0.15% between subjects with dark and light skin tones.

4.Reusable: Compared to disposable sensors, the reusable design significantly reduces long-term operating costs and aligns with the current green principles of environmental reduction in the medical industry.

►Operating Instructions

When installing the sensor onto the patient's finger, adjust the hinge to ensure a snug fit without causing excessive pressure. This sensor is for use on the fingers or toes of adults.

It is particularly important to note that to ensure consistent accuracy of measurements, the sensor needs to be repositioned every 4 hours. This requirement is especially crucial for patients requiring prolonged monitoring.

►Cleaning and Disinfection

For routine cleaning, wipe the outer surface of the sensor with 70% isopropyl alcohol wipes. For disinfection, use a 1:10 diluted bleach solution for gentle sterilization. Do not immerse the sensor or connector in any liquid during cleaning. Ensure the sensor is completely dry after each cleaning before reuse.

Do not use irradiation, high-pressure steam, or ethylene oxide gas sterilization for disinfection.

If you want to a quote for M-LNCS DCI Spo2 Sensor Adult Reusable Finger Clip REF2501, please contact us, Looking forward to hearing from you.