Philiph Goldway UT7000C Patient Monitor Repair ICU/CCU Device Repair Service

Philiph Goldway UT7000C Patient Monitor Repair ICU/CCU Device Repair Service

 
 
 
 
► Brief Introduction
 

This is a used, repaired patient monitor, model Goldway UT7000C. This monitor is one of the most frequently used in clinical settings, highly practical, feature-rich, and a top choice for many hospitals.

The UT7000C monitor features a 12.1-inch color display screen that clearly shows various vital signs, such as ECG, SpO2, and body temperature, ensuring the visualization of monitoring data.

The model number and serial number are printed on the top of the front of the monitor for easy identification. A row of buttons is located at the bottom for basic settings, including power on/off, mode selection, and alarm value settings.

 
 
► Features

1. Multi-parameter monitoring function: Clinically used to monitor multiple basic vital signs of patients, such as ECG, SpO2, respiration, pulse, body temperature, and blood pressure, allowing medical staff to more intuitively understand the patient's condition, especially for critically ill, surgical, and postoperative patients.

2. Intelligent Alarm Management

The monitor supports audible and visual alarms. Operators can set alarm thresholds for various parameters via buttons. When these thresholds are exceeded, corresponding audible and visual alarms are automatically triggered to alert medical staff to take appropriate measures.

3. Data Storage

The monitor has a built-in data storage function that can save 24-hour vital sign trends, assisting doctors in analyzing changes in the patient's condition.

4. Practical Display and Operation Functions

The UT7000C monitor is equipped with a 12.1-inch color screen that can display multiple parameters simultaneously. Combined with physical buttons and knobs, it allows for quick operation even while wearing gloves, making it suitable for high-frequency use scenarios in operating rooms and emergency rooms.

 
► Parameters
 

 
 
► Product Picture
 


 
 
►FAQ
 

Q1: Can the patient data stored on the device be exported?

A1: The UT7000C can export patient data and waveform records through the device's built-in interface, and reports can also be printed via an external printer; however, the export function requires a compatible software version, and some older versions require a software upgrade to enable this function.

Q2: My UT7000C monitor, which hasn't been used for a long time, cannot boot into the system after being turned on. What could be the problem?

A2: The battery on the motherboard may be dead, causing system time loss and preventing boot. Replacing the motherboard coin cell battery and resetting the system time should resolve the issue. If boot failure persists, check the motherboard firmware or storage module.

Q3: Blood pressure measurement always fails in neonatal mode. How do I adjust this?

A3: In neonatal mode, the device's blood pressure measurement cycle and inflation pressure range are limited.

Please confirm: Whether a neonatal-sized cuff is being used; Whether the measurement mode is correctly switched to "neonatal"; Whether the patient remains quiet during measurement and avoids limb movement interference.

90 Day Warranty                             SGS ceryification