LNCS DCI SpO2 Sensor Finger Clip REF 1863 Adult Reusable New Original Medical Accessories

LNCS DCI SpO2 Sensor Finger Clip REF 1863 Adult Reusable New Original

► Brief Description

LNCS DCI SpO2 Sensor REF 1863, is a finger-clip adult repeatable sensor. Hemoglobin oxygen saturation in arterial blood is measured transcutaneously. The sensor features an integrated cable design and is designed to provide superior pulse oximetry monitoring performance in the clinic. The DCI mark indicates that the product is suitable for adults weighing more than 30 kg. The cable is made of gray PVC, has a diameter of 4mm, has a total length of approximately 3 feet (0.9 meters) and comes with the original box.

► Specifications

►Detailed Photos

►Advantages

1.Very low noise, LNC technology is able to provide the highest integrated pulse oximetry sensor cable performance while maintaining cable flexibility for reusable sensors.

2.Able to maintain measurement accuracy under patient movement or low perfusion conditions. The patient's slight limb movement or poor peripheral circulation will not affect the monitoring data.

3.The sensor is equipped with a 9-pin D-Sub three-button connector (LNCS interface), which can be directly connected to a compatible pulse oximeter.

4.Compared with disposable adhesive sensors, the reusable design not only reduces long-term use costs, but is also more environmentally friendly. At the same time, the covered connector design enhances moisture resistance and improves cable durability.

►How to use the sensor

1. Hold the sensor with its opening facing the patient's finger.

2. Make sure the side of the sensor with the fingertip mark is facing up.

3. Gently open the clamp and insert the patient's finger (usually the index finger) until the fingertip touches the stop at the end of the sensor.

4. Adjust the position of your finger so that it is evenly placed in the center of the bottom of the clip. Note that the fingernail should be facing the side of the sensor light-emitting tube. Straighten the cables along the back of the patient's hand.

5. Connect the sensor plug to a compatible patient monitor or oximeter.

During the monitoring process, instruct the patient to keep his fingers still and relax.

►Warning

This sensor is a non-sterile, non-sterilizable product. Equipment must be cleaned and disinfected after each use and between patients (at least once a week)

If you want to explore more details about the LNCS DCI SpO2 Sensor Finger Clip REF 1863 , please send the inquiry to us, We will reply immediately