CONTEC ABPM60 Ambulatory Blood Pressure Monitor 24 Hour Record
CONTEC ABPM60 Ambulatory Blood Pressure Monitor 24 Hour Record
Product Introduction
The CONTEC ABPM60 is a portable, 24‑hour ambulatory blood pressure monitor designed for continuous, NIBP tracking in adults. It operates on the oscillometric principle, making it suitable for use in hospitals, clinics, and private practices.
Compact and lightweight, the device is worn by the patient throughout their daily activities, automatically recording blood pressure readings at pre‑set intervals. It can store up to 500 measurement groups, providing clinicians with a comprehensive dataset for diagnosing hypertension and other cardiovascular conditions. A rechargeable lithium battery powers the unit, and a 0.96‑inch colour LCD displays real‑time information including countdown timers, battery status, and error messages.
The ABPM60 connects to a PC via a USB interface, and the bundled analysis software supports data review, trend chart generation, and report printing. Bluetooth transmission is also available for wireless data transfer
Measurement Parameter
| Measurement Range | |
| Pressure | 0 – 300 mmHg (0 – 40 kPa) |
| Pulse Rate | 40 beats/min – 240 beats/min |
| BP Measurement Range | |
| Systolic (SYS) | 30 – 270 mmHg (4.0 – 36.0 kPa) |
| Diastolic (DIA) | 10 – 220 mmHg (1.3 – 29.3 kPa) |
| Overpressure Protection | 297 ± 3 mmHg (39.6 ± 0.4 kPa) |
| Resolution | 1 mmHg |
| Cuff Pressure Accuracy | |
| Static Pressure | ±3 mmHg (±0.4 kPa) |
Overview
To simplify operation this monitor arranges different ports and controls at separated positions.
Operation buttons sit on its top panel. The LCD screen presents current time cuff pressure readings diastolic value systolic value pulse rate mean arterial pressure and system prompts.
The NIBP cuff connector attaches to the top section whereas the data playback port is placed on the bottom.
Top of the device: the button, socket of cuff extension tube
Bottom of the device: data playback interface:
NIBP Measure
1. The NIBP function applies the oscillometric measurement principle.
2. Two working modes including manual and automatic options are supported. Read‑outs of SYS MAP DIA and PR are available under both modes.
3. Under manual mode the unit completes a single‑time blood‑pressure detection.
4. The automatic mode enables periodic measurements. Users can select cycle intervals from 5 10 15 20 30 40 60 90 120 180 and 240 minutes.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.