Hamil-ton Replacement Ventilator Filter Kit PN 16127501 for C1 T1

Hamil-ton Replacement Ventilator Filter Kit PN 16127501 for C1 T1

Brief introduction

This filter kit, designed specifically for HAMIL-TON C1 and T1 ventilators, provides critical protection for both the inspiratory and expiratory sides of the breathing circuit. Each kit contains a high-efficiency hydrophobic bacterial and viral filter, installed at the device port to form a reliable two-way contamination barrier. These consumables are manufactured by Hamil-ton Medical to original equipment manufacturer (OEM) standards and maintain stable performance throughout their recommended lifespan.

Functions

1. Protects internal ventilator components from dust and particulate matter. The intake filter intercepts dust, fibers, and airborne particles, preventing them from entering the ventilator's turbine and internal gas passages.

2. Maintains efficient cooling system operation. The fan filter prevents dust buildup on the cooling fan and cooling components. This helps maintain proper airflow in the ventilator's cooling system, prevents overheating, and ensures stable operation even in harsh environments.

3. Features a low-resistance design. This filter employs a low resistance, breathable structure. It provides effective filtration without restricting the ventilator's airflow or affecting its pressure output.

Specifications

Installation and Removal Procedure

1. Installation begins with the ventilator powered off and the breathing circuit disconnected from the patient.

The inspiratory filter aligns with the inspiratory port on the front panel of the device, where it presses into place with a gentle twisting motion until fully seated. The expiratory filter attaches to the expiratory port using the same push-and-twist method, with the arrow or flow indicator on the filter housing pointing in the direction of exhaled airflow.

2. Removal follows the reverse sequence.

 A firm grip on the filter body combined with a counterclockwise twist releases the connector, allowing the used filter to be pulled straight out. Both filters should be inspected after installation to confirm a secure fit and the absence of air leaks around the connection points.