Drager 8318639 brand new original authentic adapter gas detector charging base 10.31V 2.5A

Drager 8318639 brand new original authentic adapter gas detector charging base 10.31V 2.5A

► Brief Description

The Dräger 8318639 gas detector charging base is black, measures approximately 13 × 4.8 × 4.4 cm, and weighs about 0.25 kg. It is a key charging accessory for the X-am 1/2/5 series gas detectors. Featuring a genuine, brand-new design, the module supports an input specification of 10.31V/2.5A and can fully charge the gas detector in approximately 4 hours. It can be used as a standalone module, combined with a single-unit charger to form a complete charging kit, or paired with a vehicle mounting bracket for use in automotive environments.

► Specifications

►Detailed Photos

►Key Features

1. High-Efficiency Charging

The 8318639 charging module features a built-in DC converter and battery charging functionality, ensuring safe and rapid charging for gas detection equipment.

2. Comprehensive Safety Protection

The module integrates overload and short-circuit protection mechanisms, effectively preventing equipment damage caused by abnormal currents during charging. This design is particularly critical for gas detection equipment used in flammable or explosive environments, ensuring a safe and reliable charging process.

3. Versatile Application

The charging module offers excellent system compatibility, allowing for flexible deployment across a wide range of scenarios.

4. Status Indication

Equipped with LED status indicators, the module provides a clear visual display of charging progress and battery status, enabling operators to quickly verify whether the device is currently charging or fully charged.

►Important Precautions Before Use

1.Never perform charging operations in areas with an explosion hazard. The charger itself is not explosion-proof; using it in such areas could lead to serious danger.

2.To preserve battery life and ensure safety, charging should be performed at an ambient temperature between 5°C and 35°C. Charging may automatically pause if the temperature falls outside this range and will resume once the temperature returns to the acceptable range.

3.The charging module is intended for indoor use only. If permanently installed, it should be mounted no higher than 2 meters above the ground and secured with four screws. Multiple modules can be connected together, with a maximum of five units linked in series.

4.Ensure that the charging contacts on both the charging module and the gas detector are clean and free of foreign objects. Contaminated contacts may result in charging failure or poor electrical connection.

►Operating Steps

1.Switch off the Dräger gas detector and place it correctly into the charging module. If the detector is powered on, it will usually switch off automatically upon being placed in the charging module.

2.During charging, the LED indicator on the charging module or battery will flash at a specific frequency (red, red/green, or green, depending on the battery status).

3.Once charging is complete, the detector switches to maintenance charging mode; the LED indicator will typically flash green or remain steadily lit in green.

If you want to replace Drager 8318639 brand new original authentic adapter gas detector charging base immediately, please contact me freely. Looking forward to your inquiry.