453564435191 PHiliph AV FM20 FM30 Fetal Monitor Display Assy 5 Wire
Part Number 453564435191 PHiliphhilip AV FM20 FM30 Fetal Monitor Display Assy 5 Wire
High-resolution color TFT touch screen display with wide field of view
Angle, showing that the fetal and maternal measurements are the same size, easy-to-read numbers
Display Features
- Monitor Screen: 6.5 in / 16.51 cm
- Touchscreen Operation: Optional
Display Assembly (M2703-64503)
| Display Assembly Contents | Qty |
| Housing, Bottom | 1 |
| Housing, Top | 1 |
| Clamp | 1 |
| Pin | 2 |
| Display Holder, lefthand | 1 |
| Display Holder, righthand | 1 |
| Backlight Tube | 2 |
| Hinge | 2 |
| Chassis Guide | 1 |
| Cable Guide, rear | 1 |
| Board Holder | 5 |
| Stop Lever | 1 |
| Ribbon Cable | 1 |
| PCA Touch Control | 1 |
| Inverter Board | 1 |
| TFT Display Unit | 1 |
| Touchscreen | 1 |
| Gasket (1050 mm) | 1 |
Easy to read display
1.NOP and alarm status area - shows active alert messages
2.LAN connection status indicator only. RS232 system connection is not indicated.
3 Patient identification
4 Date and time
5 Bed label (when connected to a PHiliphhilip OB TraceVue system)
6 Fetal heart sound volume adjust/indicator
7 Alarm volume adjust/indicator
8 Numeric/measurement values
9 Status indicator - for fetal trace recorder
10 Status indicator - for Avalon CTS system
Fetal recorder On
Fetal recorder Off (when Paper Save Mode is off)
Fetal recorder Off (when Paper Save Mode is on)
Recorder problem that can be solved by the user (for example, paper out, paper jam, wrong paper scale set)
Fetal recorder is defective. Call service.
11 Close all open menus and windows and return to main screen
12 Scroll to display more SmartKeys
13 SmartKeys - these can vary according to your monitor’s configuration 14 Silence - key which acknowledges all active alarms by switching off audible alarm indicators
Avalon CTS interface cable is connected to the monitor, but Avalon CTS base station is not connected to the interface cable, disconnected from AC mains, or is in Stand-by.
Avalon CTS interface cable is connected to the monitor, Avalon CTS base station is connected, powered on, and cordless transducers are ready to use, but no cordless transducers are currently active (all are still docked in the base station)
Avalon CTS interface cable is connected to the monitor, Avalon CTS base station is connected, powered on, and at least one cordless transducer has been taken out of the base station and is active. Any connected wired transducers are disabled
15 Status line - shows status and prompt messages
16 Signal quality indicator
Good/full.
Acceptable/medium
Poor/no signal
17 Measurement label (a cordless measurement from a connected Avalon CTS system is indicated by the symbol)
18 NST timer, if configured (default is off)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.